Foxboro P0926KN 24V Power Cable I/A Series

Product Description

The Foxboro P0926KN is an industrial-grade DC power cable developed for reliable power distribution within Foxboro I/A Series and Evo 200 Series control systems. It is primarily used to connect regulated 24 VDC power supplies to baseplates and fieldbus modules, ensuring consistent voltage delivery across the system.

Built with shielded conductors and robust insulation, this cable minimizes electromagnetic interference while maintaining stable current flow in demanding environments. Its standardized 3-pin connector configuration allows direct integration with Foxboro power supplies and system hardware without additional wiring adaptation.

The P0926KN is widely deployed in installations requiring high current capacity and dependable operation under continuous load conditions.

Key Features

• Shielded cable design for low-noise 24 VDC transmission

• 16 AWG stranded copper conductors supporting high current loads

• Pre-terminated 3-pin connectors for direct system compatibility

• Designed for use with Foxboro I/A Series and Evo 200 Series platforms

• Supports redundant power architectures with parallel connections

• Resistant to corrosion, vibration, and electrical interference

• Suitable for hazardous locations requiring reliable power distribution

Technical Specifications

Electrical Parameters

• Nominal Voltage: 24 VDC

• Maximum Continuous Current: Up to 16.7 A

• Conductor Type: Stranded copper, shielded

• Wire Size: 16 AWG

• Connector Type:

• 3-pin industrial power connector

• Pin-to-socket configuration

• Function: Power supply output cable or baseplate input connection

Mechanical Characteristics

• Standard Length: 1.5 m (60 inches / 152 cm)

• Cable Structure: Multi-core with shielding layer and industrial insulation

• Vibration Tolerance: Up to 0.75 g across 5–500 Hz range

• Weight: 0.30 lbs

• Installation: Plug-and-play connection between power supply and baseplate

Environmental Ratings

• Operating Temperature: –30°C to +71°C

• Storage Temperature: –55°C to +85°C

• Relative Humidity: 5–95% RH, non-condensing

• Environmental Classification: G3 (resistant to corrosive gases such as H₂S and chlorine)

• Hazardous Area Suitability: Compatible with Division 2 / Zone 2 installations (system dependent)

Compatibility

Power Supply Units

• FPS400-24

• P0922YU (AC input models)

• P0922YC (DC input models)

Baseplates and Modules

• Compatible with multiple 200 Series baseplates including KE, HF, HJ, HM, HT, KH, HZ, JC, JF, JM variants

• Supports FBM modules and distributed I/O assemblies

Redundant Configurations

• Multiple cables can be used in parallel to support redundant 24 VDC supply architectures

Applications

• Power distribution for FBM modules in DCS systems

• Supplying 24 VDC to control system baseplates

• Redundant power system design in critical processes

• Industrial environments with high EMI or corrosive conditions

• Oil & gas, petrochemical, and power generation facilities

FAQ

Q: What is the primary use of the P0926KN cable?
A: It is used to connect 24 VDC power supplies to Foxboro baseplates and modules, ensuring stable system power distribution.

Q: Is this cable suitable for high-current applications?
A: Yes, the 16 AWG conductors support currents up to 16.7 A under appropriate conditions.

Q: Can the cable be used in redundant systems?
A: Yes, multiple cables can be installed in parallel to support redundancy.

Q: Does it provide protection against electrical noise?
A: The integrated shielding reduces EMI/RFI, helping maintain clean power delivery.