الوصف
Product Description
The GE WESDAC D20K I/O Module is a high-performance interface card designed for the D20/D200 RTU family. It enables seamless integration between field devices and the D20K processor, supporting both digital and analog signals. Its modular design allows flexible expansion and easy maintenance in substation automation environments.
Key Features
-
Plug-in modular card compatible with D20/D200 chassis
-
Supports multiple signal types: Digital Input (DI), Digital Output (DO), Analog Input (AI), Analog Output (AO)
-
Hot-swappable for uninterrupted operation
-
High optical/electrical isolation between channels and system bus
-
Supports redundant power supply for critical reliability
-
Rugged industrial-grade design suitable for harsh substation conditions
Technical Specifications
| Specification | Details |
|---|---|
| Model Family | WESDAC D20K I/O Modules |
| Signal Types Supported | Digital Input, Digital Output, Analog Input, Analog Output |
| Digital Input Range | 24 V DC nominal (wet or dry contact) |
| Digital Output Range | 24 V DC nominal, 0.5–1 A per channel (relay or transistor) |
| Analog Input Range | 0–5 V or 4–20 mA (configurable) |
| Analog Output Range | 4–20 mA (for actuator or transducer control) |
| Isolation | Optical/electrical, 1.5–2.5 kV between input and logic |
| Communication Interface | Internal D20 backplane bus (RS-485 / DLink) |
| Mounting | Plug-in card for D20 chassis |
| Operating Voltage | 24 V DC, 48 V DC, 125 V DC (model-specific) |
| Control/Output Channels | 8 or 16 channels (model-dependent) |
| Analog Input Channels | 8 or 16 channels depending on sub-model |
| Operating Temperature | –40°C to +70°C |
| Storage Temperature | –40°C to +85°C |
| Humidity | 5%–95% non-condensing |
| Dimensions | 120 × 60 × 40 mm |
| Weight | 0.3 kg |
Applications
The GE WESDAC D20K I/O Module is widely used in substation automation for:
-
Monitoring switches, relays, sensors, and transducers
-
Controlling actuators and protective devices
-
Collecting analog and digital signals for SCADA integration
-
Expanding RTU capacity in mission-critical energy management systems
FAQ
Q: Can this module be used with older D20/D200 systems?
A: Yes, it is fully compatible with the D20/D200 RTU chassis.
Q: Is it hot-swappable?
A: Yes, modules can be replaced without powering down the system.
Q: What signal types does it support?
A: Digital Input/Output and Analog Input/Output, configurable per module.
Q: How many channels are available per module?
A: Depending on the sub-model, 8 or 16 channels for both analog and digital I/O.
Q: What operating voltages are supported?
A: 24 V DC, 48 V DC, and 125 V DC depending on the module version.
الميزات
نحن نرحب بالطلبات الكبيرة ولدينا حد أدنى للطلب يبلغ وحدة واحدة فقط.
عند الطلب، يمكننا توفير جميع الوثائق اللازمة، بما في ذلك شهادات المنشأ/المطابقة وغيرها من مستندات التصدير المطلوبة.
بالنسبة للعناصر المتوفرة في المخزون، نهدف إلى التسليم خلال 1-3 أيام بعد تأكيد الدفع. سيتم تسليم العناصر التي لها أوقات انتظار محددة وفقًا للجدول المقتبس.
نحن نقبل الدفع بنسبة 100% عن طريق التحويل البرقي (T/T) قبل الشحن. بالنسبة للعناصر التي لها أوقات انتظار، يتطلب دفع 30% كدفعة مقدمة، مع دفع الـ 70% المتبقية قبل الشحن. بالنسبة لتحويلات اليوان الصيني (RMB)، يرجى الاتصال بنا إذا كان لديك وكيل في الصين.
نحن نقدم ضمانًا قياسيًا لمدة سنة واحدة على جميع العناصر الجديدة والأصلية. إذا كنت بحاجة إلى ضمان ممتد، يرجى الاتصال بنا للحصول على تفاصيل التكلفة الإضافية.
رضاكم مهم بالنسبة لنا. إذا كنت بحاجة إلى إرجاع عنصر، يجب أن يتم ذلك خلال 30 يومًا من تاريخ الطلب. يجب أن يكون المنتج غير مستخدم، غير مفتوح، وفي عبوته الأصلية مع جميع الملحقات المرفقة. تتم معالجة المبالغ المستردة خلال 5-7 أيام عمل بعد استلامنا للعنصر المُعاد. يرجى ملاحظة أن رسوم الشحن والرسوم ذات الصلة غير قابلة للاسترداد.