Epro CON031+PR6423/00R-101 Eddy Current System Kit
$178.00
$390.00
Deskripsi
Product Description
The CON031 + PR6423/00R-101 is an integrated eddy-current measurement solution combining a proximity probe with a dedicated signal conditioning module. The system is engineered for continuous monitoring of shaft displacement and vibration in high-speed rotating machinery, delivering stable, contact-free measurement data for protection and diagnostics.
The probe performs the primary sensing function, while the CON031 unit processes the raw eddy-current signal into standardized industrial outputs suitable for control and monitoring systems.
Technical Specifications
Probe Unit – PR6423/00R-101
| Parameter | Specification |
|---|---|
| Sensor Type | Eddy-current proximity displacement probe |
| Probe Diameter | 8 mm |
| Measurement Range | ~0–2 mm typical (system calibrated, up to 15 mm depending configuration) |
| Target Material | Conductive ferromagnetic steels (optimized for shaft surfaces) |
| Frequency Response | Up to 1 MHz (probe-level dynamic capability) |
| Housing Material | Stainless steel (corrosion-resistant) |
| Tip Material | PEEK (Polyether Ether Ketone) |
| Operating Temperature | -35 °C to +100 °C |
| Cable Temperature Rating | Up to +150 °C (dependent on cable type) |
| Cable Length | Standard 3 m (custom options available) |
| Protection Rating | IP66 (installed condition dependent) |
Signal Converter – CON031 Module
| Parameter | Specification |
|---|---|
| Function | Eddy-current signal conditioning and conversion |
| Input Signal | Raw probe signal from PR6423 series |
| Output Types | 4–20 mA / 0–10 V analog output |
| Supply Voltage | 24 V DC (operating range 10–30 V DC) |
| Operating Temperature | -20 °C to +70 °C |
| Mounting Type | DIN rail or panel installation |
| Certifications | CE, ATEX, IECEx, CSA (variant dependent for hazardous zones) |
| Protection Concept | Intrinsically safe configurations available |
System Engineering Characteristics
-
Dual-component architecture ensures separation of sensing and signal conditioning
-
Non-contact eddy-current principle eliminates mechanical wear
-
Stable measurement performance under high-speed shaft rotation
-
Compatible with industrial protection and condition monitoring platforms
-
Suitable for long-term continuous operation in harsh mechanical environments
Application Scope
-
Steam and gas turbine shaft vibration monitoring
-
Compressor axial displacement and instability detection
-
Generator rotor condition assessment
-
Gearbox misalignment and wear detection
-
Predictive maintenance systems in heavy rotating equipment
Installation Considerations
-
Proper air gap control is critical (typically around 0.5 mm depending on target geometry)
-
Calibration must match probe-to-surface material characteristics
-
Converter selection determines system output format and safety classification
-
Shielded cabling recommended in high EMI environments
FAQ
Q1: Can the probe operate without the CON031 module?
No. The probe generates raw eddy-current signals and requires CON031 for signal conversion.
Q2: Is the system suitable for hazardous environments?
Yes, when used with certified CON031 variants, the system supports ATEX/IECEx applications.
Q3: What materials are recommended for measurement targets?
Ferromagnetic steels such as shaft-grade alloys provide the most stable response.
Fitur
Jumlah Pesanan Minimum (MOQ)
Kami menerima pesanan dalam jumlah besar dan memiliki jumlah pesanan minimum hanya satu unit.
Sertifikat dan Dokumentasi
Atas permintaan, kami dapat menyediakan semua dokumentasi yang diperlukan, termasuk Sertifikat Asal/Kesesuaian dan dokumen ekspor lain yang dibutuhkan.
Waktu Pengiriman
Untuk barang yang tersedia, kami berusaha mengirim dalam 1-3 hari setelah konfirmasi pembayaran. Barang dengan waktu tunggu yang ditentukan akan dikirim sesuai jadwal yang telah disebutkan.
Metode Pembayaran
Kami menerima pembayaran 100% T/T (Telegraphic Transfer) sebelum pengiriman. Untuk barang dengan waktu tunggu, diperlukan deposit 30% di muka, dengan sisa 70% harus dibayar sebelum pengiriman. Untuk transfer RMB, silakan hubungi kami jika Anda memiliki agen di China.
Garansi
Kami menawarkan garansi standar satu tahun untuk semua barang baru dan asli. Jika Anda memerlukan garansi tambahan, silakan hubungi kami untuk detail biaya tambahan.
Kebijakan Pengembalian Dana dan Pengembalian Barang
Kepuasan Anda penting bagi kami. Jika Anda perlu mengembalikan barang, itu harus dilakukan dalam waktu 30 hari sejak tanggal pemesanan. Produk harus belum digunakan, belum dibuka, dan dalam kemasan aslinya dengan semua aksesori yang disertakan. Pengembalian dana diproses dalam waktu 5-7 hari kerja setelah kami menerima barang yang dikembalikan. Harap dicatat bahwa biaya pengiriman dan biaya terkait tidak dapat dikembalikan.
Unggulan
Produk pelengkap
Pengiriman Ekspres
Pengiriman cepat untuk kebutuhan mendesak Anda.
Persediaan Besar
Stok yang luas memastikan ketersediaan cepat.
Kualitas Premium
Komponen PLC & DCS asli dan berkualitas tinggi.
Dukungan Pelanggan 24/7
Layanan andal untuk klien di seluruh dunia.