ABB PM867K01 3BSE076355R1 Processor Unit HI

General Info for PM867K01

• Article number: 3BSE076355R1 (PM867K01)
• Redundancy: No
• High Integrity: Yes
• Clock Frequency: 133 MHz
• Performance (1000 boolean operations): 0.09 ms
• Memory: 64 MB
• RAM for application: 46.559 MB
• Flash memory for storage: No

Detailed Data

• Processor type: MPC866
• Switch over time in red. conf.: Max 10 ms
• Applications per controller: 32
• Programs per application: 64
• Diagrams per application: 128
• Tasks per controller: 32
• Cycle times: 32
• Cycle time per application: Down to 1 ms
• Flash PROM for firmware storage: 18 MB
• Power supply: 24 V DC (19.2-30 V DC)
• Power consumption: 210/360 mA
• Power dissipation: 5.1 W (8.6 W max)
• Redundant power supply status input: Yes
• Back-up battery: Lithium, 3.6 V
• Clock synchronization: 1 ms between AC 800M controllers by CNCP protocol
• Event queue: Up to 3000 events
• AC 800M transmission speed to OPC server: 36-86 events/sec, 113-143 data messages/sec
• Communication modules on CEX bus: 12
• Supply current on CEX bus: Max 2.4 A
• I/O clusters on Modulebus (non-red. CPU): 1 electrical, 7 optical
• I/O clusters on Modulebus (red. CPU): 0 electrical + 7 optical
• I/O capacity on Modulebus: Max 96 (single PM867) or 84 (red. PM867)
• Modulebus scan rate: 0-100 ms
• Supply current on Electrical Modulebus: 24 V: Max 1.0 A, 5 V: Max 1.5 A
• Ethernet channels: 2
• Ethernet interface: 10 Mbit/s, RJ-45, female (8-pole)
• Control Network protocol: MMS and IAC
• Recommended control network backbone: 100 Mbit/s switched Ethernet
• Real-time clock stability: 100 ppm (approx. 1 h/year)
• RS-232C interfaces: 2 (general and service tool)

Environmental and Certification

• Operating Temperature: +5 to +55 °C (+41 to +131 °F)
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Temperature changes: 3 °C/min, IEC/EN 61131-2
• Pollution degree: Degree 2, IEC/EN 61131-2
• Corrosion protection: G3 compliant (ISA 71.04)
• Relative humidity: 5 to 95%, non-condensing
• Vibration: 10 < f < 50 Hz: 0.0375 mm amplitude, 50 < f < 150 Hz: 0.5 g acceleration
• Rated isolation voltage: 500 V a.c.
• Dielectric test voltage: 50 V
• Protection class: IP20 (EN 60529, IEC 529)
• Altitude: 2000 m (6,562 ft), IEC/EN 61131-2
• Emission & Immunity: EN 61000-6-4, EN 61000-6-2
• Electrical Safety: EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201
• Hazardous location: UL 60079-15, cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X
• Marine certificates: ABS, BV, DNV-GL, (LR, Lloyd Pending)
• TUV Approval: Yes
• RoHS compliance: EN 50581:2012
• WEEE compliance: DIRECTIVE/2012/19/EU

Dimensions

• Width: 119 mm (4.7 in)
• Height: 186 mm (7.3 in)
• Depth: 135 mm (5.3 in)
• Weight (with base): 1200 g (2.6 lbs)