Epro CON031+PR6423/00R-101 Eddy Current System Kit
$178.00
$390.00
Penerangan
Product Description
The CON031 + PR6423/00R-101 is an integrated eddy-current measurement solution combining a proximity probe with a dedicated signal conditioning module. The system is engineered for continuous monitoring of shaft displacement and vibration in high-speed rotating machinery, delivering stable, contact-free measurement data for protection and diagnostics.
The probe performs the primary sensing function, while the CON031 unit processes the raw eddy-current signal into standardized industrial outputs suitable for control and monitoring systems.
Technical Specifications
Probe Unit – PR6423/00R-101
| Parameter | Specification |
|---|---|
| Sensor Type | Eddy-current proximity displacement probe |
| Probe Diameter | 8 mm |
| Measurement Range | ~0–2 mm typical (system calibrated, up to 15 mm depending configuration) |
| Target Material | Conductive ferromagnetic steels (optimized for shaft surfaces) |
| Frequency Response | Up to 1 MHz (probe-level dynamic capability) |
| Housing Material | Stainless steel (corrosion-resistant) |
| Tip Material | PEEK (Polyether Ether Ketone) |
| Operating Temperature | -35 °C to +100 °C |
| Cable Temperature Rating | Up to +150 °C (dependent on cable type) |
| Cable Length | Standard 3 m (custom options available) |
| Protection Rating | IP66 (installed condition dependent) |
Signal Converter – CON031 Module
| Parameter | Specification |
|---|---|
| Function | Eddy-current signal conditioning and conversion |
| Input Signal | Raw probe signal from PR6423 series |
| Output Types | 4–20 mA / 0–10 V analog output |
| Supply Voltage | 24 V DC (operating range 10–30 V DC) |
| Operating Temperature | -20 °C to +70 °C |
| Mounting Type | DIN rail or panel installation |
| Certifications | CE, ATEX, IECEx, CSA (variant dependent for hazardous zones) |
| Protection Concept | Intrinsically safe configurations available |
System Engineering Characteristics
-
Dual-component architecture ensures separation of sensing and signal conditioning
-
Non-contact eddy-current principle eliminates mechanical wear
-
Stable measurement performance under high-speed shaft rotation
-
Compatible with industrial protection and condition monitoring platforms
-
Suitable for long-term continuous operation in harsh mechanical environments
Application Scope
-
Steam and gas turbine shaft vibration monitoring
-
Compressor axial displacement and instability detection
-
Generator rotor condition assessment
-
Gearbox misalignment and wear detection
-
Predictive maintenance systems in heavy rotating equipment
Installation Considerations
-
Proper air gap control is critical (typically around 0.5 mm depending on target geometry)
-
Calibration must match probe-to-surface material characteristics
-
Converter selection determines system output format and safety classification
-
Shielded cabling recommended in high EMI environments
FAQ
Q1: Can the probe operate without the CON031 module?
No. The probe generates raw eddy-current signals and requires CON031 for signal conversion.
Q2: Is the system suitable for hazardous environments?
Yes, when used with certified CON031 variants, the system supports ATEX/IECEx applications.
Q3: What materials are recommended for measurement targets?
Ferromagnetic steels such as shaft-grade alloys provide the most stable response.
Ciri-ciri
Kuantiti Pesanan Minimum (MOQ)
Kami mengalu-alukan pesanan pukal dan mempunyai kuantiti pesanan minimum hanya satu unit.
Sijil dan Dokumentasi
Atas permintaan, kami boleh menyediakan semua dokumentasi yang diperlukan, termasuk Sijil Asal/Kepatuhan dan dokumen eksport lain yang diperlukan.
Masa Penghantaran
Untuk barang dalam stok, kami berhasrat untuk menghantar dalam masa 1-3 hari selepas pengesahan pembayaran. Barang dengan masa utama yang ditetapkan akan dihantar mengikut jadual yang dinyatakan.
Kaedah Pembayaran
Kami menerima pembayaran 100% T/T (Pemindahan Telegraf) sebelum penghantaran. Untuk barang dengan masa menunggu, deposit 30% diperlukan terlebih dahulu, dengan baki 70% perlu dibayar sebelum penghantaran. Untuk pemindahan RMB, sila hubungi kami jika anda mempunyai ejen di China.
Jaminan
Kami menawarkan jaminan standard satu tahun untuk semua barang baru dan asli. Jika anda memerlukan jaminan lanjutan, sila hubungi kami untuk maklumat kos tambahan.
Polisi Pemulangan dan Bayaran Balik
Kepuasan anda penting bagi kami. Jika anda perlu memulangkan barang, ia mesti dilakukan dalam masa 30 hari dari tarikh pesanan. Produk mesti tidak digunakan, tidak dibuka, dan dalam pembungkusan asal dengan semua aksesori disertakan. Bayaran balik diproses dalam masa 5-7 hari bekerja selepas kami menerima barang yang dipulangkan. Sila ambil perhatian bahawa caj penghantaran dan berkaitan tidak boleh dikembalikan.
Ditampilkan
Produk pelengkap
Penghantaran Ekspres
Penghantaran pantas untuk keperluan mendesak anda.
Inventori Besar
Stok yang luas memastikan ketersediaan cepat.
Kualiti Premium
Komponen PLC & DCS tulen, berkualiti tinggi.
Sokongan Pelanggan 24/7
Perkhidmatan boleh dipercayai untuk pelanggan di seluruh dunia.