1783-BMS10CGL Allen-Bradley Stratix 5700 Ethernet Switch
$123.00
$320.00
Description
Allen-Bradley 1783-BMS10CGL Stratix 5700 Managed Industrial Ethernet Switch
Configured for managed industrial Ethernet communication in Stratix 5700 automation networks, the Allen-Bradley 1783-BMS10CGL (1783-BMS10CGL Managed Industrial Ethernet Switch) provides Layer 2 switching, network segmentation, and deterministic data exchange across EtherNet/IP platforms. The unit includes 8 copper Fast Ethernet ports and 2 combo Gigabit uplink ports with SFP interface support.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-BMS10CGL |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 2.5 kg |
| Dimensions | 45 x 130 x 110 mm |
| Operating Temp | -40 to +60 deg C |
| Power Consumption | <= 15 W typical |
| Series | Stratix 5700 Managed Industrial Ethernet Switches |
| Switch Type | Managed Layer 2 Ethernet switch |
| Port Configuration | 8 x 10/100 Mbps copper RJ45 ports + 2 x 100/1000 Mbps copper/SFP combo uplink ports |
| Power Supply | 24 VDC, 18-32 VDC range, dual power input |
| Network Management | Web GUI, CLI, SNMP v1/v2c/v3, EtherNet/IP integration |
| Redundancy Protocols | REP, RSTP, STP |
| VLAN Support | IEEE 802.1Q, up to 255 VLANs |
| Quality of Service | IEEE 802.1p, DSCP |
| Mounting Type | DIN rail mounting |
| Protection Rating | IP30 |
| Humidity Range | 5-95% RH, non-condensing |
| Storage Temperature | -40 to +85 deg C |
| Certifications | UL, CE, cUL, ATEX Zone 2 |
| Product Status | Discontinued September 1, 2024; replacement model 1783-CMS10B |
Industrial Ethernet Network Management and Firmware Compatibility
The 1783-BMS10CGL uses Cisco IOS-based firmware customized by Rockwell Automation for industrial Ethernet applications. The switch supports EtherNet/IP integration with Rockwell automation environments, including Studio 5000, FactoryTalk Network Manager, and RSLinx communication structures.
The Stratix 5700 platform supports Profinet / EtherNet/IP deterministic network architectures through managed Layer 2 switching functions, including VLAN configuration, traffic prioritization, and redundancy protocol operation. Firmware compatibility and configuration migration require validation when replacing the unit with newer Stratix family hardware.
Frequently Asked Questions
Q: Does the 1783-BMS10CGL support redundant power input operation?
A: Yes. The switch provides dual 24 VDC power inputs for industrial control cabinet power architectures. External power source design and switching behavior depend on the installed power arrangement.
Q: Which Ethernet communication methods are supported by this switch?
A: The unit supports managed Ethernet communication through EtherNet/IP integration, SNMP management, CLI access, and web-based configuration interfaces.
Q: Can the switch be replaced directly by newer Stratix models?
A: The recommended replacement is the 1783-CMS10B. Network configuration, firmware functions, and managed switch settings should be verified before replacement.
Field Installation Guidelines
Install the 1783-BMS10CGL on a grounded DIN rail inside an industrial control enclosure. Maintain separation between Ethernet communication cables and high-voltage power conductors to reduce electromagnetic interference.
Use shielded Ethernet cables where required by the industrial network design. Connect cable shields according to the control system grounding standard and avoid multiple unintended grounding paths.
Verify 24 VDC supply polarity, input voltage range, and protective earth connections before energizing the switch. Configure VLANs, QoS parameters, and redundancy protocols according to the network topology before placing the device into operational service.
For SFP uplink connections, verify optical module compatibility and fiber routing requirements before installation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.