Allen-Bradley 1492-MUA4-A13-A17 Conversion Mounting Assembly
$123.00
$320.00
Description
Allen-Bradley 1492-MUA4-A13-A17 Conversion Mounting Assembly
The Allen-Bradley 1492-MUA4-A13-A17 serves as the primary 1492-MUA4-A13-A17 Conversion Mounting Assembly utilized to execute mechanical chassis migration and I/O conversion support across PLC-5 to ControlLogix platform upgrade projects. The assembly provides mounting provisions for I/O conversion modules and associated wiring components when converting a 1771-A4B chassis to a 1756-A13 or 1756-A17 chassis configuration.
Suffix Breakdown & Model Matrix
The catalog number 1492-MUA4-A13-A17 is documented as a dedicated conversion mounting assembly for migration between specific Allen-Bradley chassis platforms. No official suffix decomposition or configurable ordering matrix is specified in the supplied documentation.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1492-MUA4-A13-A17 |
| Brand | Allen-Bradley |
| Product Type | Conversion Mounting Assembly |
| Series | 1492-MUA |
| Application | PLC-5 1771 to ControlLogix 1756 conversion |
| Supported Source Chassis | 1771-A4B |
| Supported Target Chassis | 1756-A13, 1756-A17 |
| Function | Mounting of I/O conversion modules and wiring conversion hardware |
| Installation Method | Pre-wired cable and termination system |
| Mounting Type | Direct-fit conversion assembly |
| Supported Systems | 1771 PLC-5, 1756 ControlLogix, Modicon 800 migration projects |
| Certifications | CE, UL, C-UL-US, FM |
| Compliance | IECEx, RoHS |
| Weight | 5.42 lb |
| Dimensions | Chassis-dependent; refer to manufacturer dimensional drawings |
Firmware Flash Compatibility and Migration Architecture
The 1492-MUA4-A13-A17 is a passive conversion platform intended to support hardware migration from PLC-5 architecture to ControlLogix architecture. The assembly itself contains no programmable firmware and therefore requires no firmware flash updates. Compatibility is determined by the associated ControlLogix chassis, conversion modules, interface cables, and installed I/O hardware.
By providing predefined mounting locations for conversion hardware, the assembly assists in preserving wiring organization during migration projects and reduces modifications to existing field termination layouts.
Frequently Asked Questions
Q: Does the 1492-MUA4-A13-A17 contain active electronics or require external power?
A: No. The assembly is a passive mechanical mounting structure and does not require electrical power.
Q: Can this assembly be used with ControlLogix chassis other than 1756-A13 or 1756-A17?
A: The supplied documentation identifies compatibility specifically with conversions from a 1771-A4B chassis to 1756-A13 or 1756-A17 chassis configurations.
Q: Does the assembly support hot-swapping of conversion modules?
A: Hot-swap capability depends on the installed conversion modules and host ControlLogix hardware. The mounting assembly itself provides mechanical support only and does not determine hot-swap behavior.
Field Installation Guidelines
-
Verify the source chassis is a 1771-A4B system before beginning the conversion process.
-
Confirm the target chassis is either a 1756-A13 or 1756-A17 model as specified by the assembly design.
-
De-energize all control system power sources before installing conversion hardware.
-
Secure the mounting assembly using the manufacturer-recommended fastening method and panel layout.
-
Route conversion cables separately from high-energy conductors to minimize induced electrical noise.
-
Maintain identification labels on legacy and replacement wiring throughout the migration process.
-
Inspect all mounting hardware and cable retention points after installation to prevent mechanical stress on conversion modules.
-
Follow grounding and shielding practices specified for the associated ControlLogix and conversion system components.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.