Allen-Bradley 1606-XLE480EP Switched Mode Power Supply
$123.00
$320.00
Description
Allen-Bradley 1606-XLE480EP Switched Mode Power Supply
The Allen-Bradley 1606-XLE480EP serves as the primary 1606-XLE480EP switched mode power supply utilized to execute AC-to-DC power conversion across industrial control platforms. The unit accepts 100-240 VAC single-phase input and delivers regulated 24-28 VDC output for DIN rail or back-panel mounted control systems.
Suffix Breakdown & Model Matrix
The supplied documentation identifies 1606-XLE480EP as a fixed catalog number within the 1606-XLE series. No official suffix breakdown or variant matrix is specified in the provided data.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1606-XLE480EP |
| Brand | Allen-Bradley |
| Weight | 0.82 kg |
| Operating Temp | Up to 60 deg C (performance ratings vary with ambient temperature) |
| Power Consumption | Input current 4.36 A at 120 VAC / 2.33 A at 230 VAC |
| Product Type | Switched Mode Power Supply |
| Product Series | 1606-XLE Series |
| Input Voltage | 100-240 VAC |
| Input Voltage Frequency | 50-60 Hz +/- 6 % |
| Phase | 1 |
| Output Voltage | 24-28 VDC adjustable |
| Nominal Output Voltage | 24 VDC |
| Output Current | 20 A at 24 VDC |
| Maximum Output Current | 24 A at 24 VDC (ambient < 45 deg C) |
| Rated Output Power | 480 W |
| Peak Output Power | 576 W (ambient < 45 deg C) |
| Efficiency | 94 % |
| Power Factor | 0.99 at 120 VAC / 0.95 at 230 VAC |
| AC Inrush Current | 9 A peak at 120 VAC / 7 A peak at 230 VAC |
| Hold-Up Time | 26 ms typical at 120 VAC and 230 VAC |
| Mounting Method | DIN rail or back-panel mounting |
Firmware Flash Compatibility and Power Distribution
Within PLC-based control architectures, the 1606-XLE480EP functions as a power conversion device supplying regulated DC power to processors, communication modules, and distributed I/O assemblies. Stable output voltage adjustment from 24 VDC to 28 VDC supports varying cabinet power distribution requirements. The unit is intended for integration with industrial control networks where power continuity during short-duration line disturbances is supported by the specified hold-up time characteristics.
Frequently Asked Questions (FAQ)
Q: Does the 1606-XLE480EP support hot-swapping during operation?
A: The provided documentation does not specify hot-swap capability. Input power should be isolated before installation, removal, or wiring modifications.
Q: What output current is available at the nominal 24 VDC output?
A: The power supply delivers 20 A continuous at 24 VDC, with higher output capability specified under certain ambient temperature conditions.
Q: Can the output voltage be adjusted above 24 VDC?
A: Yes. The specified adjustment range is 24-28 VDC.
Field Installation Guidelines
-
Install the power supply on a properly grounded DIN rail or rigid back panel.
-
Separate input AC wiring from low-voltage DC output wiring to reduce conducted electrical noise.
-
Verify conductor sizing according to expected load current and applicable electrical codes.
-
Maintain adequate enclosure ventilation to prevent temperature rise around the power supply.
-
Connect protective earth before energizing the unit.
-
Route communication and instrumentation cables separately from power conductors where practical.
-
Confirm output voltage settings before connecting field equipment and controller electronics.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.