Allen-Bradley 1761-CBL-PM02 MicroLogix Programming Cable
$123.00
$320.00
Description
Allen-Bradley 1761-CBL-PM02 MicroLogix Programming Cable
Configured for RS-232 communication connection in MicroLogix 1000 controller systems, the Allen-Bradley 1761-CBL-PM02 (1761-CBL-PM02 Programming Cable) provides direct physical/electrical execution through an 8-pin Mini DIN to 9-pin D-Shell interface. The 2 meter cable assembly supports PC communication links and serial data transfer between controller hardware and programming terminals.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1761-CBL-PM02 |
| Brand | Allen-Bradley |
| Origin | USA |
| Product Type | Programming Cable / Network Cable |
| Product Line | MicroLogix 1000 |
| Cable Length | 2 m |
| Connector Type | 8-Pin Mini DIN to 9-Pin D-Shell |
| Communication Interface | RS-232 |
| PC Connection | Supported with 9-pin D-Shell serial ports |
| Weight | 0.24 lbs |
| Dimensions | 2 m cable assembly length |
| Operating Temp | 0 to 55 deg C |
| Storage Temp | -40 to 85 deg C |
| Relative Humidity | 5 to 95%, non-condensing |
| Operating Altitude | Up to 1000 m above sea level |
| Power Consumption | Passive cable assembly, no external power consumption |
EtherNet/IP and MicroLogix Serial Communication Compatibility
The 1761-CBL-PM02 cable is configured for MicroLogix controller programming and communication connections through RS-232 serial signaling. The cable assembly provides the required pin conversion between the controller-side 8-pin Mini DIN interface and PC-side 9-pin D-Shell serial interface. Series C or later cable models support Class 1 Division 2 application requirements.
The cable is designed for physical data transmission only and does not contain active communication electronics, firmware, or protocol processing components. Installation requires correct connector orientation and separation from high-noise power conductors to maintain signal integrity.
Frequently Asked Questions
Q: Does the 1761-CBL-PM02 cable require an external power supply?
A: No. The cable is a passive RS-232 communication assembly and receives no external operating power.
Q: Which communication interface is supported by the 1761-CBL-PM02?
A: The cable supports RS-232 connections using an 8-pin Mini DIN connector on the controller side and a 9-pin D-Shell connector for PC communication.
Q: Can the cable be installed in Class 1 Division 2 applications?
A: Class 1 Division 2 application support applies to Series C or later cable models according to the specified product requirements.
Field Installation Guidelines
Install the cable with the connectors fully seated and secured to prevent intermittent serial communication faults. Route the communication cable separately from high-voltage power wiring, motor leads, and sources of electromagnetic interference.
Maintain proper cable shielding practices where applicable, with shield termination following the controller panel grounding design. Avoid sharp bends, excessive mechanical stress, and cable routing paths that may expose the assembly to abrasion or chemical damage.
Verify connector pin compatibility before connecting the cable between MicroLogix controllers and PC programming equipment. Confirm environmental conditions remain within the specified operating temperature and humidity limits.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.