Allen-Bradley 1783-BMS20CA Stratix 5700 Managed Industrial Ethernet Switch
$123.00
$320.00
Description
Allen-Bradley 1783-BMS20CA Stratix 5700 Managed Industrial Ethernet Switch
Configured for industrial Ethernet switching and network segmentation in EtherNet/IP environments, the Allen-Bradley 1783-BMS20CA (1783-BMS20CA Stratix 5700 Managed Industrial Ethernet Switch) provides direct physical data communication management through 20 Ethernet ports, including copper, combo, and SFP fiber interfaces for managed Layer 2 network operation.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-BMS20CA |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 2.0 kg |
| Dimensions | 12.7 cm x 12.7 cm x 15.2 cm |
| Operating Temp | -40 to +60 deg C |
| Power Consumption | 30 W maximum, 21 W typical at 24 VDC and 40 deg C |
| Product Type | Managed Industrial Ethernet Switch |
| Series | Stratix 5700 |
| Port Count | 20 active ports |
| Copper Interfaces | 16 x 10/100 Mbps RJ45 Fast Ethernet ports |
| Combo Interfaces | 2 x 10/100 Mbps dual-purpose RJ45 or fiber ports |
| Fiber Interfaces | 2 x 100Base-FX SFP slots |
| Network Layer | Layer 2 managed switching |
| Redundancy Support | Device Level Ring (DLR) |
| Mounting Method | DIN rail top hat rail mounting |
| Enclosure Rating | IP30 open-style housing |
EtherNet/IP Network Management and Industrial Control Features
The 1783-BMS20CA operates as a managed Layer 2 Ethernet switch within Rockwell Automation industrial control architectures. The unit supports EtherNet/IP network infrastructures with VLAN segmentation, Quality of Service (QoS) prioritization, and MAC address filtering functions for controlled industrial communication paths.
The Stratix 5700 platform integrates Cisco switching technology, enabling configuration and diagnostics through Rockwell Automation engineering environments. Studio 5000 Add-On Profiles provide parameter configuration and diagnostic visibility for controller-based system integration.
The switch supports Device Level Ring (DLR) operation for EtherNet/IP ring topologies. Firmware feature levels provide managed switching functions including port monitoring, traffic control, and network status reporting.
Frequently Asked Questions
Q: What Ethernet interfaces are available on the 1783-BMS20CA?
A: The switch provides 16 x 10/100 Mbps RJ45 copper ports, 2 x dual-purpose RJ45/fiber combo ports, and 2 x 100Base-FX SFP fiber slots.
Q: Does the 1783-BMS20CA provide Layer 3 routing functions?
A: No. The unit operates as a Layer 2 managed Ethernet switch and does not provide Layer 3 routing capability.
Q: What power supply configuration is required for installation?
A: The switch requires a 24 VDC industrial power source sized for the maximum 30 W power consumption condition. Redundant power feeds may be applied according to system design requirements.
Field Installation Guidelines
Install the 1783-BMS20CA on a properly grounded DIN rail within an enclosure suitable for the operating environment. Maintain airflow clearance around the housing to support thermal dissipation and avoid blocking ventilation paths.
Route Ethernet communication cables separately from high-voltage power conductors and sources of electrical noise. Use shielded Ethernet cabling where required by the network design, with cable shields terminated according to plant grounding standards.
Connect the 24 VDC power wiring using appropriate industrial practices, including correct polarity verification and protective grounding of the enclosure. Verify fiber module compatibility, connector cleanliness, and cable bend radius before commissioning.
Configure VLAN, QoS, DLR parameters, and port settings through approved Rockwell Automation configuration tools before placing the switch into production operation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.