Allen-Bradley 1783-SFP100LX/A Stratix 100Base-LX SFP Transceiver Module
$123.00
$320.00
Description
Allen-Bradley 1783-SFP100LX/A Stratix 100Base-LX SFP Transceiver Module
Configured for 100 Mbps single-mode fiber Ethernet communication in Stratix industrial Ethernet switch platforms, the Allen-Bradley 1783-SFP100LX/A (1783-SFP100LX SFP transceiver module) provides direct optical data transmission through duplex LC interfaces. The module operates at 1310 nm wavelength, supports up to 10 km fiber links, and provides hot-swappable connectivity for compatible Stratix switches.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-SFP100LX/A |
| Brand | Allen-Bradley |
| Origin | United States |
| Weight | 1 lbs |
| Dimensions | SFP form factor |
| Operating Temp | 0 to 70 deg C |
| Power Consumption | 800 mW |
| Product Type | 100Base-LX SFP Transceiver Module |
| Data Rate | 100 Mbps |
| Fiber Type | Single-mode fiber (9 um core diameter) |
| Optical Wavelength | 1310 nm |
| Fiber Reach | Up to 10 km |
| Connector Type | Duplex LC optical connector |
| Supply Voltage | 3.15-3.45 V |
| Transmitter Output Power | -15 to -8 dBm |
| Receiver Sensitivity | <= -8 dBm |
| Optical Extinction Ratio | >= 9 dB |
| Monitoring Function | Digital Optical Monitoring (DOM) |
| Compliance | RoHS, FCC Part 15, IEC 60825-1, TAA |
EtherNet/IP Optical Communication Characteristics
The 1783-SFP100LX/A provides optical Ethernet connectivity for Stratix industrial switching platforms through 100Base-LX signaling. The module supports deterministic network architectures using fiber-based links and integrates with industrial Ethernet switch configurations requiring extended physical separation between network nodes.
The hot-pluggable SFP interface allows module insertion and removal from compatible switch ports without replacing the complete switching hardware. Digital Optical Monitoring (DOM) provides optical operating data for link condition assessment, including transmitter and receiver performance parameters.
Frequently Asked Questions
Q: What fiber type is required for the 1783-SFP100LX/A module?
A: The module requires single-mode fiber with a 9 um core diameter. Multimode fiber is not supported.
Q: Can the 1783-SFP100LX/A be installed while the switch remains powered?
A: The module uses a hot-swappable SFP form factor. Installation procedures must follow the applicable Stratix switch hardware manual requirements.
Q: What optical connector is used on this SFP transceiver?
A: The module uses a duplex LC optical connector for transmit and receive fiber channels.
Field Installation Guidelines
Install the 1783-SFP100LX/A only in compatible Allen-Bradley Stratix switch SFP ports. Verify fiber type, connector cleanliness, and optical polarity before connection.
Use proper fiber handling procedures to prevent contamination, excessive bending, or mechanical stress on the optical cable. Maintain separation between fiber cabling and high-voltage power conductors where applicable.
Follow laser safety practices during installation and maintenance. Avoid direct exposure to optical output ports and use approved inspection equipment for fiber verification.
Ensure grounding and shielding practices are applied to the associated switch enclosure and network installation according to industrial Ethernet installation standards.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.