Allen-Bradley 2198-H008-ERS Kinetix 5500 Servo Drive
$123.00
$320.00
Description
Allen-Bradley 2198-H008-ERS Kinetix 5500 Servo Drive
Configured for servo motor current control and motion execution in EtherNet/IP industrial control systems, the Allen-Bradley 2198-H008-ERS (2198-H008-ERS Kinetix 5500 Servo Drive) provides direct physical/electrical execution. The drive accepts 195-264 V rms and 324-528 V rms AC input ranges and delivers controlled three-phase motor output with integrated hardwired Safe Torque Off capability.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2198-H008-ERS |
| Brand | Allen-Bradley |
| Origin | United States |
| Weight | 3.11 lbs |
| Product Line | Kinetix 5500 |
| Product Type | Servo Drive |
| Input Voltage | 195-264 V rms single-phase / three-phase (240 V nominal); 324-528 V rms three-phase (480 V nominal) |
| Input Frequency | 50/60 Hz |
| Control Input | 24 VDC, 2.4 A |
| Motor Output Voltage | 0-460 V rms, three-phase |
| Motor Output Frequency | 0-590 Hz |
| Continuous Output Current | 2.5 A rms |
| Continuous Output Current (0-peak) | 3.5 A |
| Peak Output Current (rms) | 6.25 A |
| Peak Output Current (0-peak) | 8.8 A |
| Continuous Output Power | 0.5 kW at 195-264 V rms single-phase; 0.8 kW at 195-264 V rms three-phase; 1.6 kW at 324-528 V rms three-phase |
| Velocity Loop Bandwidth | 300 Hz |
| Current Loop Bandwidth | 1000 Hz |
| Efficiency | 0.97 |
| Short-Circuit Current Rating | 200,000 A rms symmetrical |
| Safety Function | Hardwired Safe Torque Off (STO) |
| Frame Size | Frame Size 1 |
| Integrated Safety over EtherNet/IP | No |
EtherNet/IP Motion Control and Firmware Compatibility
The 2198-H008-ERS operates within the Kinetix 5500 servo platform for coordinated motion applications using EtherNet/IP communication architecture. The drive supports deterministic network-based motion commands when integrated with compatible Allen-Bradley controllers and motion configurations. Firmware compatibility must be verified against the controller revision, motion software version, and system configuration before commissioning.
The Kinetix 5500 platform uses modular industrial control integration with scalable I/O and drive axis configurations. Backplane bus communication velocity, network cycle performance, and firmware flash compatibility depend on the associated controller and system revision.
Frequently Asked Questions
Q: Does the 2198-H008-ERS support integrated Safety over EtherNet/IP?
A: No. This model provides a hardwired Safe Torque Off (STO) safety function and does not include Integrated Safety over EtherNet/IP.
Q: What are the motor output electrical limits of the drive?
A: The drive provides 0-460 V rms three-phase motor output with a continuous current rating of 2.5 A rms and peak output current of 6.25 A rms.
Q: Can the servo drive be installed with direct consideration of firmware compatibility?
A: Yes. Firmware revision compatibility between the drive, controller, and motion configuration must be confirmed before firmware updates or system commissioning.
Field Installation Guidelines
Install the 2198-H008-ERS in accordance with the Kinetix 5500 installation requirements and applicable industrial electrical standards.
- Verify AC input voltage configuration before energizing the drive. The unit supports different voltage ranges depending on single-phase or three-phase supply selection.
- Use appropriate grounding practices for protective earth and cable shield termination to reduce electrical noise coupling.
- Route motor power cables separately from low-level feedback and communication wiring to minimize electromagnetic interference.
- Confirm motor feedback wiring, connector orientation, and shielding before applying control power.
- Ensure the hardwired STO circuit is correctly connected and validated before enabling axis motion.
- Maintain proper enclosure ventilation and mounting clearance according to the installation manual requirements.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.