Allen-Bradley 22A-D8P7N104 PowerFlex 4 Adjustable Frequency Drive
$123.00
$320.00
Description
Allen-Bradley 22A-D8P7N104 PowerFlex 4 Adjustable Frequency Drive
The Allen-Bradley 22A-D8P7N104, also cataloged as the 22A Adjustable Frequency Drive, operates as a dedicated motor speed control component for three-phase AC motor regulation within PowerFlex 4 drive control systems. The unit provides 380 to 480 V AC three-phase input, 0 to 460 V AC output, and 8.7 A output current capability.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 22A-D8P7N104 |
| Brand | Allen-Bradley |
| Weight | 4.00 lbs |
| Operating Temp | -10 to 40 deg C |
| Power Consumption | 3.7 kW / 5 HP output rating |
| Product Type | Adjustable Frequency Drive |
| Series | PowerFlex 4 |
| Input Voltage | 380 to 480 V AC, 3 phase |
| Output Voltage | 0 to 460 V AC |
| Output Current | 8.7 A |
| Input Current | 9 A |
| Input kVA | 8.6 kVA |
| Enclosure Rating | IP20 open enclosure |
| Frame Size | Size B |
| Mounting Method | 35 mm DIN rail or screw mounting |
| Interface | Fixed keypad |
| Filter Configuration | No filter |
| Brake Configuration | Standard brake |
Industrial Control and Drive Configuration Features
The PowerFlex 4 platform uses parameter-based drive configuration for AC motor control functions. The 22A-D8P7N104 supports deterministic drive operation through its embedded control architecture and fixed keypad interface. Firmware flash compatibility procedures are applied according to PowerFlex family configuration requirements to maintain parameter and software alignment during service operations.
The drive supports industrial control cabinet integration with panel mounting and DIN rail mounting options. I/O density scaling within a control system is managed through the connected automation architecture rather than internal drive expansion. The unit is designed for integration with standard industrial networks and controller environments where compatible communication modules are applied.
Frequently Asked Questions
Q: Does the 22A-D8P7N104 support hot-swapping during operation?
A: The drive is not specified as a hot-swappable device. Power must be removed before physical installation, wiring changes, or hardware replacement.
Q: What enclosure configuration is provided for this drive?
A: The unit uses an IP20 open enclosure configuration intended for installation inside a suitable control cabinet.
Q: What mounting methods are supported by the hardware?
A: The drive supports 35 mm DIN rail mounting or screw mounting according to the installation configuration.
Field Installation Guidelines
Install the drive in a control cabinet environment with adequate protection from dust, moisture, and conductive contamination. Verify that the incoming three-phase supply voltage matches the drive input rating before energizing the unit.
Use properly rated power conductors and separate AC power wiring from low-level signal wiring to reduce electrical interference. Apply appropriate grounding practices for the enclosure, motor frame, and cable shields where shielded motor cables are used.
Maintain correct terminal tightening procedures and verify motor connection parameters before startup. Follow PowerFlex 4 installation documentation for commissioning, parameter setup, and fault diagnostics.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.