Allen-Bradley 2711-T5A15L1 PanelView 550 Operator Terminal
$123.00
$320.00
Description
Allen-Bradley 2711-T5A15L1 PanelView 550 Operator Terminal
The Allen-Bradley 2711-T5A15L1, also cataloged as the 2711-T5A15L1 PanelView 550 Operator Terminal, provides touchscreen HMI operation through ControlNet and RS-232 interfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T5A15L1 |
| Brand | Allen-Bradley |
| Product Type | PanelView 550 Operator Terminal |
| Product Family | PanelView Standard Terminals |
| Product Line | PanelView 550 |
| Series | A, B, C, D, E, F, G, H |
| Weight | 2.31 lb |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | 20 W heat dissipation; separate input power consumption value not specified |
| Nominal Input Supply | 24 VDC |
| Input Voltage Range | 18 to 32 VDC |
| Display Size | 5.5 in |
| Display Type | Monochrome LCD, blue mode |
| Display Area | 120 x 60 mm |
| Resolution | 256 x 128 pixels |
| Input Type | Touchscreen |
| Touch Cell Size | 26 x 30 pixels |
| Touch Actuation Rating | 1 million presses |
| Backlight | LED, 100,000 hr stated life |
| Application Runtime Memory | 170 KB |
| Nonvolatile Memory | 240 KB |
| Communication Ports | 1 x ControlNet; 1 x RS-232 printer interface |
| Communication Cable | 2711-NC13 |
| Memory Card | 2711-NM232 |
| Time Clock Battery | 2711-NB4 Operator Interface |
| Enclosure Rating | NEMA Type 12/13, Type 4X indoor use, IP54, IP65 |
| Heat Dissipation | 20 W, 69 BTU/hr |
PanelView 550 ControlNet and HMI Interface
The 2711-T5A15L1 combines a monochrome 256 x 128 pixel LCD with a touch-based operator interface. The display area measures 120 x 60 mm, while the touch interface uses defined touch cells for operator actuation.
ControlNet provides the primary network communication interface specified for this terminal. An additional RS-232 port provides printer-interface connectivity.
The terminal accepts a nominal 24 VDC supply across an 18 to 32 VDC input range. Wiring should maintain the specified DC polarity and supply voltage at the terminal input.
Application storage includes 170 KB of runtime memory and 240 KB of nonvolatile memory for application objects, text, and bitmaps. The 2711-NM232 memory card is specified as the removable memory option.
Frequently Asked Questions (FAQ)
Q: What DC supply voltage does the 2711-T5A15L1 require?
A: The nominal input supply is 24 VDC, with a specified operating input range of 18 to 32 VDC.
Q: Which communication interfaces are provided on this PanelView terminal?
A: The terminal provides one ControlNet communication port and one RS-232 printer interface.
Q: What display and touch hardware does the terminal use?
A: It uses a 5.5 in monochrome LCD with 256 x 128 pixel resolution and touchscreen input.
Field Installation Guidelines
- Verify the DC supply remains within the specified 18 to 32 VDC input range before energizing the terminal.
- Use wiring with appropriate insulation ratings and route DC power separately from high-energy switching conductors.
- Maintain correct supply polarity and provide suitable upstream overcurrent protection according to the installation design.
- Install the terminal within the specified 0 to 55 deg C operating temperature range.
- Confirm the panel cutout and rear clearance accommodate the stated installed depth and memory-card access requirements.
- Maintain enclosure sealing practices consistent with the required NEMA and IP protection level.
- Route ControlNet communication wiring separately from high-voltage power and high-current switching conductors.
- Follow the applicable ControlNet cable and termination requirements for the installed network topology.
- Connect the RS-232 interface according to the required printer-interface pinout and cable specification.
- Where shielded communication cables are used, terminate shields according to the system grounding design and applicable installation standards.
- Do not perform wiring changes while energized unless the installation procedure and equipment documentation explicitly permit such work.
- Verify touchscreen operation and communication status after installation before placing the terminal into normal service.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.