Allen-Bradley 2711-T6C16L1/A PanelView 600 Operator Interface Terminal
$123.00
$320.00
Description
Allen-Bradley 2711-T6C16L1/A PanelView 600 Operator Interface Terminal
The Allen-Bradley 2711-T6C16L1/A, also cataloged as the 2711-T6C16L1 PanelView 600 operator interface terminal, provides touchscreen HMI operation through DF1 RS-232 communication with Allen-Bradley PLC and SLC controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-T6C16L1/A |
| Brand | Allen-Bradley |
| Product Line | PanelView 600 |
| Series | Series A |
| Dimensions | 152 x 185 x 82 mm |
| Display Type | Color active-matrix TFT LCD |
| Display Size | 5.0 in (127 mm) |
| Display Resolution | 320 x 234 pixels |
| Input Type | Analog touchscreen |
| Communication Port | DF1 RS-232 |
| Communication Connector | 8-pin Mini-DIN / 9-pin D-sub depending on port configuration |
| Auxiliary Port | RS-232 printer port |
| Input Voltage | 24 VDC, 18 to 32 VDC |
| Power Consumption | 24 W maximum, 1.0 A at 24 VDC |
| Application Flash Memory | 240 KB |
| RAM | 256 KB |
| Backlight | Non-replaceable halogen lamp, Catalog Number 2711-NC13 |
| Enclosure Rating | NEMA Type 12, 13, 4X; indoor use only; IP54 / IP65 |
| Operating Temp | 0 to 55 deg C |
| Storage Temp | -20 to 70 deg C |
| Relative Humidity | 5 to 95 percent, non-condensing |
PanelView 600 Communication and HMI Characteristics
The 2711-T6C16L1/A uses DF1 RS-232 communication for serial data exchange with compatible Allen-Bradley controllers. The communication interface provides point-to-point serial connectivity rather than Ethernet-based industrial networking.
The 5.0 in color active-matrix TFT display provides 320 x 234 pixel graphical presentation. Analog touchscreen input supplies operator navigation and process command entry.
The external 24 VDC supply accepts an 18 to 32 VDC operating range. Maximum specified consumption is 24 W, corresponding to 1.0 A at 24 VDC.
The internal application memory consists of 240 KB flash memory with 256 KB RAM. The specified backlight uses a non-replaceable halogen lamp identified by Catalog Number 2711-NC13.
Frequently Asked Questions
Q: What communication interface does the 2711-T6C16L1/A provide?
A: The terminal provides DF1 RS-232 communication, with connector configuration dependent on the installed port arrangement.
Q: What DC supply range is specified for this terminal?
A: The terminal operates from an external 24 VDC supply within an 18 to 32 VDC input range.
Q: Can the touchscreen backlight be replaced?
A: The supplied specification identifies the backlight as a non-replaceable halogen lamp, Catalog Number 2711-NC13.
Field Installation Guidelines
Install the terminal within an enclosure compatible with the specified NEMA and IP protection requirements. Confirm the enclosure provides suitable environmental protection before energizing the equipment.
Provide a regulated 24 VDC supply within the specified 18 to 32 VDC input range. Size the supply wiring for the maximum specified 1.0 A load and account for upstream voltage drop.
Route RS-232 communication wiring separately from high-voltage conductors, motor leads, and high-current switching circuits. Minimize parallel routing with high-noise conductors to reduce electromagnetic coupling.
Use shielded serial cable where the installation environment contains significant electrical noise. Terminate cable shields according to the plant grounding standard and avoid creating unintended ground-current paths.
Verify connector orientation and pin assignment before applying power or connecting the controller. Do not insert or remove communication connectors while energized unless the applicable installation procedure explicitly permits the operation.
Maintain the specified 0 to 55 deg C operating range and 5 to 95 percent non-condensing humidity range. Provide adequate enclosure ventilation where internal heat accumulation could exceed the specified environmental limits.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.