Allen-Bradley 2711-TC4 PanelView 1200 Operator Terminal
$123.00
$320.00
Description
Allen-Bradley 2711-TC4 PanelView 1200 Operator Terminal
Configured for touchscreen operator input and Remote I/O communication in the PanelView 1200 platform, the Allen-Bradley 2711-TC4 (2711-TC4 operator terminal) provides direct operator interface functions through a color CRT display and touch-cell matrix.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711-TC4 |
| Brand | Allen-Bradley |
| Product Line | PanelView 1200 |
| Category | Operator Terminals |
| Display Type | Color CRT |
| Display Size | 12 in. stated in descriptive data; 10.1 in. stated in specification table |
| Touch Interface | Touchscreen |
| Touch Cells | 120 |
| Touchscreen Construction | Chemically strengthened glass with scratch-resistant polyester covering |
| Mounting | Stud-mounted |
| Communication | Remote I/O |
| Programming / Printer Port | RS-232 |
| Enclosure | NEMA 4X PanelView |
| Input Power | 90-264 VAC stated in feature data; 90-130 VAC stated in specification table |
| Memory | RAM |
| Operating Temp | 32 to 122 deg F |
| Storage Temp | -40 to 158 deg F |
| Weight | 32.40 lb |
Industrial Control and Remote I/O Interface
The 2711-TC4 uses Remote I/O communication for data exchange with compatible Allen-Bradley control systems. The separate RS-232 port provides programming or printer connectivity according to the supplied technical data.
The touchscreen contains 120 touch cells and uses chemically strengthened glass with a scratch-resistant polyester surface. Therefore, installation should protect the display surface from mechanical impact, abrasive contamination, and excessive cleaning pressure.
The supplied data identifies the terminal as a PanelView 1200 device with stud mounting and a NEMA 4X enclosure configuration. Backplane communication is not specified; Remote I/O should therefore remain the primary system interface designation.
Frequently Asked Questions
Q: Does the supplied data confirm hot-swap operation for the 2711-TC4?
A: No. The supplied information does not specify hot-swap capability or energized module replacement procedures.
Q: What communication interfaces are identified for this terminal?
A: The supplied data identifies Remote I/O communication and an RS-232 programming or printer port.
Q: Are the conflicting display, weight, and input-power specifications confirmed?
A: No. The source data contains conflicting values, so the discrepancies require verification against the applicable hardware manual or nameplate.
Field Installation Guidelines
Install the terminal using the specified stud-mount arrangement and maintain uniform mechanical support around the enclosure.
Verify the actual terminal nameplate before connecting power because the supplied source contains conflicting AC input ranges.
Use appropriately rated wiring, protective devices, and terminal hardware for the confirmed supply voltage and installation environment.
Route communication wiring separately from high-voltage conductors and high-current switching circuits to reduce electromagnetic interference.
Where shielded communication cable is used, terminate the shield according to the applicable Allen-Bradley installation specification and site grounding practice.
Avoid routing RS-232 or Remote I/O wiring adjacent to motor leads, contactor wiring, or other high-noise conductors.
Maintain the NEMA 4X enclosure sealing arrangement during panel installation, particularly around mounting penetrations and cable entries.
Do not apply abrasive cleaners or sharp tools to the touchscreen surface because the display uses a protective polyester covering.
Confirm operating temperature, storage conditions, power rating, communication configuration, and firmware compatibility against the terminal documentation before commissioning.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.