Allen-Bradley 2711C-T4T/A PanelView Component HMI Terminal
$123.00
$320.00
Description
Allen-Bradley 2711C-T4T/A PanelView Component HMI Terminal
Configured for operator interface execution in EtherNet/IP and serial PLC communication networks, the Allen-Bradley 2711C-T4T/A (2711C-T4T PanelView Component HMI Terminal) provides direct physical/electrical execution through touchscreen input, display processing, and controller data exchange.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711C-T4T/A |
| Brand | Allen-Bradley / Rockwell Automation |
| Origin | USA |
| Operating Temp | 0 deg C to 50 deg C |
| Power Consumption | 5 W maximum, 0.21 A at 24 VDC |
| Product Series | PanelView Component T4T |
| Display Type | Color transflective TFT |
| Display Size | 4.3 inches |
| Display Resolution | 480 x 272 WQVGA |
| Touch Input | Analog resistive touchscreen |
| Input Voltage | 24 VDC nominal, 18 to 30 VDC operating range |
| Processor | 300 MHz |
| Memory | 64 MB Flash, 64 MB RAM |
| Communication Interface | Ethernet RJ-45 10/100 Mbps, RS-232/RS-422/RS-485, USB Host, USB Device |
| Supported Protocols | EtherNet/IP, Modbus TCP, Modbus RTU, DF1, DH-485 |
| Enclosure Rating | NEMA 4X indoor, IP65 |
| Mounting Type | Panel mount with mounting levers |
EtherNet/IP and Firmware Flash Compatibility
The 2711C-T4T/A uses Allen-Bradley PanelView Component architecture for direct communication with MicroLogix, Micro800, and SLC 500 controllers. The Ethernet interface supports EtherNet/IP communication for controller data exchange, while the serial port supports legacy DF1 and DH-485 communication paths. Firmware management and application transfer are performed through Connected Components Workbench (CCW) software or the integrated browser-based configuration environment.
The terminal supports firmware flash compatibility within the PanelView Component product family. Application files, communication parameters, and terminal configurations are stored through internal Flash memory for standalone machine operation.
Frequently Asked Questions
Q: Does the 2711C-T4T/A support hot-swap replacement during machine operation?
A: The 2711C-T4T/A is a panel-mounted HMI terminal and is not specified as a hot-swappable module. Power isolation and controlled shutdown procedures are required before physical replacement.
Q: What type of touchscreen input hardware is installed on this terminal?
A: The unit uses an analog resistive touchscreen interface designed for direct operator input through the front panel display assembly.
Q: Which communication interfaces are available for PLC connection?
A: The terminal provides Ethernet communication through an RJ-45 port and serial communication through RS-232/RS-422/RS-485 terminals. USB Host and USB Device ports are available for storage and programming functions.
Field Installation Guidelines
Install the terminal in a compatible panel cutout using the supplied mounting levers and maintain proper mechanical retention of the enclosure.
Connect the 24 VDC power supply using industrial wiring practices. Separate power wiring from high-current motor cables and electromagnetic noise sources to reduce interference on communication circuits.
For Ethernet and serial connections, use shielded industrial communication cables where required by the installation environment. Terminate cable shields according to the cabinet grounding design and avoid routing communication cables parallel to high-voltage conductors.
Verify that the touchscreen surface, enclosure gasket, and mounting hardware maintain the required environmental protection level after installation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.