Allen-Bradley 2711P-B6C20D8 PanelView Plus 6 600 Graphic Terminal
$123.00
$320.00
Description
Allen-Bradley 2711P-B6C20D8 PanelView Plus 6 600 Graphic Terminal
Configured for operator input, graphical display, and control-system communications in the PanelView Plus 6 platform, the Allen-Bradley 2711P-B6C20D8 (2711P-B6C20D8 graphic operator terminal) provides direct touchscreen/keypad operation with Ethernet, RS-232, DH-485, and USB interfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-B6C20D8 |
| Brand | Allen-Bradley |
| Product Line | PanelView Plus 6 |
| Product Family | PanelView Plus 6 Graphic Terminals |
| Series | Series A and Series B Operator Interface |
| Category | PanelViews |
| Display Size | 5.7 in |
| Display Type | Color active-matrix TFT |
| Display Area | 115 x 86 mm (4.5 x 3.4 in.) |
| Resolution | 320 x 240 pixels, 18-bit color graphics |
| Operator Input | Touchscreen and keypad |
| Touch Interface | 8-wire analog resistive |
| Touch Actuation | 1 million presses |
| Touch Operating Force | 10 to 110 g |
| Keypad | Stainless-steel membrane; numeric, navigation, and function keys |
| Memory | 512 MB RAM; 512 MB nonvolatile memory; approximately 79 MB free user memory |
| Backlight | Non-replaceable |
| Communication Ports | 1 Ethernet, 1 RS-232, DH-485, 2 USB host |
| Power Supply Input | 18-30 VDC |
| Power Consumption | 15 W maximum; 9 W typical |
| Current Consumption | 0.6 A at 24 VDC maximum; 0.375 A at 24 VDC typical |
| Real-Time Clock | Battery-backed |
| RTC Accuracy | +/- 2 minutes per month |
| RTC Battery Life | Minimum 4 years at 25 deg C |
| RTC Battery | Field-replaceable CR2032 type or equivalent; catalog number 2711P-RY2032 |
| Communication Cable | 2711-NC14 |
| Operating System | Windows CE 6 |
| Weight | 3.99 lbs |
Industrial Control Platform Communications
The 2711P-B6C20D8 provides physical communication interfaces for integration with the PanelView Plus 6 control platform. The Ethernet interface supports network communication, while the RS-232 interface provides serial connectivity. DH-485 is also listed as a supported communication interface. Two USB host ports are provided for compatible peripheral and service connections.
The terminal uses separate physical interfaces for operator input and system communications. Ethernet, RS-232, DH-485, and USB connections should be routed separately from high-energy switching conductors where practical to reduce electrical interference. Any protocol-specific communication configuration must match the connected controller and installed terminal software.
Frequently Asked Questions (FAQ)
Q: What operator input interfaces are provided by the 2711P-B6C20D8?
A: The terminal provides an 8-wire analog resistive touchscreen and a stainless-steel membrane keypad with numeric, navigation, and function keys.
Q: What DC supply voltage does the terminal require?
A: The specified external supply input range is 18-30 VDC. Power consumption is 15 W maximum and 9 W typical.
Q: Which communication interfaces are physically available?
A: The supplied specifications identify 1 Ethernet port, 1 RS-232 port, DH-485 communication, and 2 USB host ports.
Field Installation Guidelines
- Verify that the installed DC supply remains within the specified 18-30 VDC input range.
- Provide appropriate overcurrent protection for the DC supply circuit according to the installation design and applicable electrical standards.
- Mount the terminal securely in the designated panel cutout and maintain adequate clearance for rear wiring and connector access.
- Route communication cables separately from high-current, motor, contactor, and other high-noise wiring where practical.
- Terminate cable shields according to the grounding scheme specified for the connected control system and communication network.
- Use the specified communication cable or an electrically compatible cable for the applicable interface.
- Verify connector seating before energizing the terminal.
- Do not replace or service the non-replaceable display backlight in the field.
- For the battery-backed real-time clock, use the specified 2711P-RY2032 catalog item or an equivalent CR2032 coin-cell lithium battery when replacement is required.
- Confirm terminal firmware and application compatibility before performing firmware changes or memory-related service procedures.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.