Allen-Bradley 2711P-B7C4A8 PanelView Plus 6 700 Operator Terminal

Allen-Bradley 2711P-B7C4A8 PanelView Plus 6 700 Operator Terminal

The Allen-Bradley 2711P-B7C4A8, also cataloged as the 2711P-B7C4A8 PanelView Plus 6 700 Operator Terminal, provides keypad and analog resistive touchscreen input with Ethernet and RS-232 communications for operator interface functions.

Suffix Breakdown & Model Matrix

No documented suffix decoding for the individual characters in 2711P-B7C4A8 is provided in the supplied technical data. The model is therefore treated as a fixed catalog number.

Hardware Specifications

Industrial Ethernet and Interface Characteristics

The terminal provides an integrated Ethernet interface together with RS-232 communication. The supplied specifications identify Ethernet as the network interface but do not define a specific deterministic network cycle time, throughput value, or EtherNet/IP performance limit. Communication design should therefore use the documented interface capabilities rather than assume an unspecified network velocity.

The 512 MB Flash memory and 512 MB RAM provide the stated internal storage and runtime memory resources. Firmware compatibility is dependent on the applicable PanelView Plus 6 Series A or Series B configuration and the installed firmware revision; no specific firmware revision matrix is supplied.

Frequently Asked Questions (FAQ)

Q: What input methods are provided by the 2711P-B7C4A8?
A: The terminal provides a keypad with F1-F10 function keys, numeric and navigation functions, together with an analog resistive touchscreen.

Q: What communication interfaces are integrated into the terminal?
A: The supplied data identifies Ethernet, DH+, RS-232, and two USB ports. The primary stated communications are Ethernet and RS-232.

Q: What is the specified AC input range?
A: The technical data lists 100-240 VAC input, 50-60 Hz, while the general description states an external 85-264 VAC supply range.

Field Installation Guidelines

• Verify the panel cutout and mechanical mounting arrangement against the applicable PanelView Plus 6 installation documentation before installation.
• Confirm that the installed supply wiring matches the documented AC input requirements.
• Route AC supply wiring separately from low-level communication and signal wiring where practical.
• Maintain appropriate separation between Ethernet or RS-232 cables and high-voltage or high-noise conductors.
• Use the specified communication cable where required; the supplied data identifies 2711-NC14 as a communication cable.
• Terminate cable shields and functional grounds according to the applicable Allen-Bradley installation requirements and the site's grounding scheme.
• Ensure that USB, Ethernet, RS-232, and DH+ connections are mechanically secured and protected from excessive cable strain.
• Do not assume hot-swap capability unless explicitly permitted by the applicable PanelView Plus 6 installation documentation.
• Verify the installed terminal's Series A or Series B designation before applying firmware or configuration files.
• Operating temperature, enclosure rating, mounting clearances, and exact power consumption must be verified from the applicable installation manual because these values are not provided in the supplied data.