Allen-Bradley 2711P-K10C4D1 PanelView Plus 1000 Operator Terminal
$123.00
$320.00
Description
Allen-Bradley 2711P-K10C4D1 PanelView Plus 1000 Operator Terminal
The Allen-Bradley 2711P-K10C4D1, also cataloged as the 2711P-K10C4D1 PanelView Plus 1000 Operator Terminal, provides keypad-based operator input, a 10.4 in color TFT LCD display, and Ethernet and RS-232 communications from an 18-32 VDC power source.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-K10C4D1 |
| Brand | Allen-Bradley |
| Product Type | PanelView Plus 1000 Operator Terminal |
| Product Line | PanelView Plus 1000 |
| Series | Ser A, B, C, D, and F |
| Weight | 6.3 lbs |
| Input Voltage | 18-32 VDC |
| Display Size | 10.4 in |
| Display Type | Color active matrix TFT LCD |
| Display Area | 211 x 158 mm (8.3 x 6.2 in) |
| Resolution | 640 x 480 pixels |
| Backlight | CCFL, 50,000 hours minimum life |
| Input Type | Keypad |
| Keypad Rating | 1 million presses |
| Function Keys | F1-F16, K1-K16 |
| Keypad Functions | 0-9, special characters, Backspace, Enter, Left Tab, Right Tab, Shift |
| Internal Memory | 32 MB Flash Memory / 32 MB RAM |
| Stated Memory | 64 MB |
| Communication Ports | Ethernet, RS-232, USB, DH+, Remote I/O, DH485 |
| Communication | Ethernet and RS-232 |
| Communication Cable | 1761-NET-ENI |
| Display Color | Color |
Flash Memory and Firmware Compatibility
The 2711P-K10C4D1 contains 32 MB of Flash Memory and 32 MB of RAM, while the supplied specification also identifies 64 MB total memory. Firmware compatibility should be verified against the installed PanelView Plus 1000 hardware revision before applying firmware changes. The supplied data does not identify specific firmware revision limits.
The terminal provides Ethernet, RS-232, USB, DH+, Remote I/O, and DH485 communication interfaces. The actual communication protocol and connected controller configuration must correspond to the selected physical port and installed system configuration.
Frequently Asked Questions
Q: What input voltage is specified for the 2711P-K10C4D1?
A: The supplied specifications identify an input power range of 18-32 VDC, with an additional input voltage range entry of 18-30 VDC.
Q: What type of operator input does the terminal provide?
A: The terminal uses a physical keypad with F1-F16 and K1-K16 function keys, numeric keys, special-character keys, Backspace, Enter, Tab, and Shift functions. The specified keypad rating is 1 million presses.
Q: Does the terminal support Ethernet and RS-232 communication?
A: Yes. Ethernet and RS-232 are explicitly listed as communication interfaces. The supplied data also lists DH+, Remote I/O, DH485, and USB communication ports.
Field Installation Guidelines
- Verify the available DC supply against the specified 18-32 VDC input range before energizing the terminal.
- Use wiring and overcurrent protection appropriate for the installed DC supply and control panel design.
- Route communication wiring separately from high-current motor, contactor, and switching-power wiring where practical to reduce electrical interference.
- Maintain cable shielding and grounding practices consistent with the communication network and plant electrical design.
- Confirm connector orientation and mechanical retention before applying power.
- Verify the selected Ethernet, RS-232, USB, DH+, Remote I/O, or DH485 interface against the controller and network configuration before commissioning.
- Check the installed terminal revision before firmware maintenance or application transfer.
- Provide adequate panel clearance for cable routing and connector access.
- Do not apply power until field wiring has been inspected for polarity, continuity, and accidental shorts.
- Because the supplied documentation does not specify dimensions, operating temperature, or power consumption, use the applicable installation manual and nameplate data for these parameters.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.