Allen-Bradley 2711P-RAAK7 Replacement Keypad Bezel Assembly

Allen-Bradley 2711P-RAAK7 Replacement Keypad Bezel Assembly

Configured as a replacement front interface for PanelView Plus 700 and PanelView Plus 6 700 terminals, the Allen-Bradley 2711P-RAAK7 (2711P-RAAK7 replacement keypad bezel assembly) provides the physical keypad interface and protective front bezel for compatible 6.5-inch operator terminals.

Hardware Specifications

PanelView Keypad Interface and Mechanical Compatibility

The 2711P-RAAK7 is a front bezel and keypad assembly rather than a controller, communication module, or power conversion device. Its functional elements are the operator keys and the mechanical interface required for compatible PanelView terminals.

The supplied data identifies compatibility with PanelView Plus 700 and PanelView Plus 6 700 terminals using 6.5-inch color displays. The keypad provides function-key, numeric-key, and navigation-key input. No independent EtherNet/IP, Profinet, or backplane communication interface is specified for this component.

The supplied data also identifies an adapter-plate application for interfacing a PanelView Plus 7 10.4-inch display keypad touch terminal to PanelView Plus 1000 keypad/keypad touch or PanelView Standard 900 keypad/keypad touch configurations. This application should be treated as a mechanical compatibility reference for the supplied assembly data.

Frequently Asked Questions (FAQ)

Q: Does the 2711P-RAAK7 contain an independent power supply or communication interface?
A: No. The supplied specifications identify it as a replacement front bezel with keypad. No independent power consumption, network port, or communication circuitry is specified.

Q: Which terminal display size is specified for the 2711P-RAAK7?
A: The supplied data specifies compatibility with 6.5-inch color display terminals in the PanelView Plus 700 and PanelView Plus 6 700 series.

Q: What environmental range is specified for the assembly?
A: The supplied data specifies an operating temperature of 0 deg C to 55 deg C, storage temperature of -25 deg C to 70 deg C, and relative humidity of 5% to 95% non-condensing.

Field Installation Guidelines

• Isolate the associated HMI terminal from its electrical supply before removing the existing bezel assembly.
• Confirm the replacement assembly matches the terminal series and display configuration before mechanical installation.
• Remove the existing bezel using the terminal manufacturer's specified mechanical procedure; do not apply force to the display or internal electronics.
• Ensure the bezel and keypad are seated correctly against the panel interface before securing the assembly.
• Inspect the sealing interface for contamination, deformation, or damage where the specified NEMA or IP enclosure rating is required.
• Route external wiring so that it does not mechanically interfere with the keypad, bezel, or terminal enclosure.
• Maintain separation between signal wiring and power conductors according to the applicable industrial wiring standard.
• Where shielded signal cables are used, terminate shields according to the grounding method specified for the associated PanelView terminal and control system.
• Verify keypad operation and enclosure fit after installation before returning the HMI terminal to service.