Allen-Bradley 2711P-RDB10C PanelView Plus 1000 Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDB10C PanelView Plus 1000 Display Module
Configured for visual display and operator input on PanelView Plus 1000 and PanelView Plus 6 1000 terminals, the Allen-Bradley 2711P-RDB10C (2711P-RDB10 Display Module) provides a 10.4 inch TFT color LCD with keypad and analog resistive touch input. The module provides 640 x 480 resolution and supports compatible 2711P-RP1 through 2711P-RP9D operator interface logic modules.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDB10C |
| Brand | Allen-Bradley |
| Product Family | PanelView Plus Graphic Terminals |
| Product Line | PanelView Plus 1000 |
| Product Type | Display Module |
| Compatibility | PanelView Plus 1000 / PanelView Plus 6 1000 |
| Compatible Logic Modules | 2711P-RP1 through 2711P-RP9D |
| Display Type | Color active matrix TFT LCD |
| Display Size | 10.4 inches |
| Display Area | 211 x 158 mm |
| Resolution | 640 x 480 pixels |
| Display Colors | 18-bit color graphics |
| Luminance | 300 cd/m2 |
| Anti-Glare Overlay | Not included |
| Keypad | F1-F16, K1-K16, numeric and navigation keys |
| Touch Input | Analog resistive, 1 million actuations |
| Input Type | Keypad / touchscreen |
| Input Voltage | 18-32 VDC; 85-264 VAC listed for the compatible terminal assembly |
| Communication Ports | Ethernet, RS-232, USB listed for the compatible terminal assembly |
| Enclosure Type | NEMA Type 12 |
| Weight | 2.20 lb |
PanelView Plus Terminal Architecture and Module Compatibility
The 2711P-RDB10C is specified as a display module for PanelView Plus 1000 and PanelView Plus 6 1000 terminals. Its display interface combines a 640 x 480 TFT LCD with an operator keypad and analog resistive touchscreen.
The supplied compatibility data identifies 2711P-RP1 through 2711P-RP9D as compatible logic modules. The display module specification should therefore be evaluated together with the installed operator-interface logic module when verifying complete terminal configuration.
The supplied data does not specify a backplane communication rate, firmware revision compatibility matrix, hot-swap capability, or module-level power consumption. These parameters should not be inferred from the display resolution or terminal input-voltage ratings.
Frequently Asked Questions (FAQ)
Q: What display resolution does the 2711P-RDB10C provide?
A: The specified display resolution is 640 x 480 pixels on a 10.4 inch TFT color LCD.
Q: Does the module provide both keypad and touchscreen operation?
A: Yes. The specified operator interface includes F1-F16 and K1-K16 keys, numeric and navigation keys, and an analog resistive touchscreen rated for 1 million actuations.
Q: Can the 2711P-RDB10C be treated as a standalone communication module?
A: No. It is identified as a display module for PanelView Plus 1000 and PanelView Plus 6 1000 terminals. Ethernet, RS-232 and USB are listed in the supplied data for the compatible terminal assembly rather than as independent display-module functions.
Field Installation Guidelines
- Verify the installed terminal model and logic module before fitting the display module.
- Confirm mechanical alignment and connector engagement before securing the display assembly.
- Keep display-module wiring separated from high-current motor, contactor and variable-frequency-drive conductors.
- Where shielded signal wiring is used, terminate shields according to the panel grounding scheme and applicable Allen-Bradley installation documentation.
- Do not apply voltage directly to the display module unless the complete terminal assembly documentation specifies the applicable power connection.
- Verify enclosure sealing and the required NEMA Type 12 installation conditions after panel mounting.
- Inspect the display connector and mating surfaces for contamination or mechanical damage before commissioning.
- Do not perform hot-swap replacement unless the applicable PanelView Plus installation documentation explicitly permits the procedure for the installed terminal configuration.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.