Allen-Bradley 2711P-RDB7C PanelView Plus 700 Display Module

Allen-Bradley 2711P-RDB7C PanelView Plus 700 Display Module

Configured for color graphic display and touch/keypad operator input in PanelView Plus terminal assemblies, the Allen-Bradley 2711P-RDB7C (2711P-RDB7 Display Module) provides a 6.5-inch TFT LCD interface with 640 x 480 pixel resolution and 18-bit color graphics.

Hardware Specifications

Display and Operator Interface Characteristics

The 2711P-RDB7C uses a 6.5-inch color active matrix TFT LCD with a 640 x 480 pixel resolution. The display provides 18-bit color graphics and a specified luminance of 300 cd/m2. Operator input is provided through an 8-wire analog resistive touch interface and keypad interface.

The resistive touch interface is specified for 1 Million actuations with an actuation force range of 10-110 g. The supplied data specifies that an anti-glare overlay is not included.

Frequently Asked Questions

Q: What display resolution is provided by the 2711P-RDB7C?
A: The display resolution is 640 x 480 pixels.

Q: What type of touch interface does the module use?
A: The module uses an 8-wire analog resistive touch interface with a specified lifespan of 1 Million actuations.

Q: Does the module include an anti-glare overlay?
A: No. The supplied specification identifies the anti-glare overlay as not included.

Field Installation Guidelines

• Verify terminal compatibility before installing the display module. The supplied data identifies compatibility with PanelView Plus and PanelView Plus 6 terminal configurations.
• Install the module using the terminal manufacturer's specified mechanical mounting procedure.
• Protect the LCD surface from impact, excessive mechanical pressure, and contamination during installation.
• Route touch and display-related wiring separately from high-current switching conductors where practical.
• Maintain appropriate separation from motor, contactor, and other high-noise circuits to reduce electromagnetic interference.
• Connect cable shields according to the terminal system grounding specification. Avoid creating unintended ground loops.
• Confirm all connectors are fully seated before energizing the terminal.
• Do not apply electrical power until the display module and associated terminal hardware are mechanically secured.
• Operating temperature, power consumption, and overall module dimensions were not specified in the supplied source data and should be verified against the applicable Allen-Bradley installation documentation before field deployment.