Allen-Bradley 2711P-RDT10/B PanelView Plus Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDT10/B PanelView Plus Display Module
Configured for operator visualization and touch input in PanelView Plus and PanelView Plus 6 1000 HMI terminals, the Allen-Bradley 2711P-RDT10/B (2711P-RDT10 Display Module) provides direct display and analog resistive touchscreen functions. The Series B module uses a 10.4-inch active-matrix color TFT LCD with 640 x 480 VGA resolution and interfaces with compatible 2711P-RPx or 2711P-RP6x logic modules.
Suffix Breakdown & Model Matrix
| Model Element | Specification |
|---|---|
| Base Model | 2711P-RDT10 |
| Full Catalog Number | 2711P-RDT10/B |
| Series Identifier | Series B |
| Component Type | Display Module |
| Product Line | PanelView Plus / PanelView Plus 6 1000 |
| Compatible Logic Modules | 2711P-RPx, 2711P-RP6x |
The supplied data identifies /B as the Series B configuration. Series B incorporates revised backlight assemblies and component changes relative to earlier Series A versions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDT10/B |
| Brand | Allen-Bradley |
| Operating Temp | 0 deg C to 55 deg C |
| Storage Temp | -25 deg C to 70 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Power Consumption | Not specified in supplied data |
| Display Size | 10.4 inches diagonal |
| Display Type | Color active-matrix TFT LCD |
| Resolution | 640 x 480 pixels, VGA |
| Color Depth | 18-bit color |
| Luminance | Approximately 300 nits |
| Touch Interface | Analog resistive touchscreen |
| Touch Actuation Force | 10 g to 110 g |
| Backlight | Field-replaceable CCFL / LED, series dependent |
| Backlight Life | Minimum 50,000 hours at 25 deg C |
| Enclosure Rating | NEMA Type 12, 13, 4X indoor use only; IP54 / IP65 when panel-mounted |
| Logic Module Interface | Direct attachment to compatible PanelView Plus logic module |
PanelView Display and Touch Interface
The 2711P-RDT10/B provides a 10.4-inch VGA display with 640 x 480 pixel resolution and 18-bit color depth. The analog resistive touchscreen accepts operator input through physical actuation, with a specified actuation force of 10 g to 110 g.
The display module is a terminal component rather than a standalone HMI controller. Operation requires attachment to a compatible PanelView Plus logic module. The supplied compatibility data identifies the 2711P-RPx and 2711P-RP6x families.
Frequently Asked Questions (FAQ)
Q: Can the 2711P-RDT10/B operate as a standalone controller?
A: No. The supplied specifications identify it as a display module designed for direct attachment to compatible PanelView Plus logic modules.
Q: What touchscreen technology is used?
A: The module uses an analog resistive touchscreen with a specified actuation force of 10 g to 110 g.
Q: What are the specified environmental limits?
A: The operating temperature range is 0 deg C to 55 deg C, with 5% to 95% relative humidity, non-condensing. The storage temperature range is -25 deg C to 70 deg C.
Field Installation Guidelines
- Install the display module on a compatible PanelView Plus logic module according to the applicable terminal assembly procedure.
- Verify mechanical alignment and secure attachment before applying power to the assembled terminal.
- Protect the touchscreen surface from sharp tools and excessive localized mechanical force.
- Route display and signal wiring separately from high-current switching conductors where practical to reduce electrical interference.
- Maintain appropriate separation from contactors, variable-frequency drive output cables, and other high-noise conductors.
- Terminate cable shields according to the complete PanelView Plus terminal installation requirements and the plant grounding scheme.
- Verify the panel cutout, mounting surface, and enclosure sealing before installation where an IP or NEMA panel-mounted rating is required.
- Do not exceed the stated operating temperature and humidity limits during service.
- Inspect the backlight and display assembly for physical damage before installation or replacement.
- Confirm that the installed logic module is one of the compatible 2711P-RPx or 2711P-RP6x series identified in the supplied data.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.