Allen-Bradley 2711P-RDT10C/B PanelView Plus Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDT10C/B PanelView Plus Display Module
Configured for visual data presentation and operator touch input in PanelView Plus HMI terminals, the Allen-Bradley 2711P-RDT10C/B (2711P-RDT10 HMI Display Module) provides a 10.4-inch color TFT LCD, analog resistive touchscreen, and integrated LED backlight.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDT10C/B |
| Brand | Allen-Bradley / Rockwell Automation |
| Weight | 3.99 lb |
| Operating Temp | 0 deg C to 55 deg C |
| Power Consumption | Approx. 25 W display draw, supplied through connected Logic Module |
| Product Type | HMI Display Module |
| Product Family | PanelView Plus CE 1000 |
| Display Size | 10.4 in diagonal |
| Display Type | Color active-matrix TFT LCD |
| Resolution | 640 x 480 pixels, VGA |
| Color Depth | 18-bit color |
| Luminance | Approx. 300 cd/m2 |
| Input Type | Analog resistive touchscreen |
| Touch Actuation Force | 10 to 110 g |
| Backlight | Solid-state LED, non-replaceable |
| Enclosure Rating | NEMA 12, 13, 4X; IP54/IP65 when panel-mounted |
| Storage Temperature | -25 deg C to 70 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Assembly Type | Display module only |
| Compatible Platforms | PanelView Plus 1000 and PanelView Plus 6 1000 |
Modular Hardware and Firmware Compatibility
The 2711P-RDT10C/B is a display-side hardware assembly and connects to a compatible PanelView Plus logic module. The display module contains the LCD, resistive touch interface, and LED backlight assembly; application firmware and communication functions remain associated with the connected logic module.
The modular construction permits replacement of the display assembly without replacing the underlying logic module, communication hardware, or application firmware. The Series B configuration uses solid-state LED backlighting rather than the earlier CCFL arrangement identified in the supplied technical data.
Frequently Asked Questions (FAQ)
Q: Is the 2711P-RDT10C/B a complete PanelView Plus terminal?
A: No. It is a display module only. The logic module and associated terminal hardware are separate assemblies.
Q: What type of touch interface is provided?
A: The module uses an analog resistive touchscreen with a specified actuation force of 10 to 110 g.
Q: Does the display module contain the application firmware?
A: The supplied data identifies the 2711P-RDT10C/B as a display assembly. Application firmware resides with the connected PanelView Plus logic module rather than the display assembly.
Field Installation Guidelines
- Confirm that the replacement display module matches the installed PanelView Plus terminal and compatible logic module before installation.
- Isolate electrical power to the HMI assembly before removing or installing the display module.
- Protect the LCD surface and resistive touchscreen film from impact, contamination, and excessive mechanical pressure during handling.
- Route internal wiring clear of mechanical interfaces and mounting points to prevent pinching or abrasion.
- Maintain separation between signal wiring and high-current or high-frequency power conductors where applicable.
- Connect and secure all module interfaces according to the applicable PanelView Plus installation documentation.
- Verify the panel-mounted enclosure sealing condition after replacement to maintain the applicable enclosure rating.
- Restore power after mechanical installation is complete and verify display operation, touchscreen response, and communication with the connected logic module.
- Do not apply cleaning agents or mechanical tools directly to the touchscreen surface unless permitted by the applicable equipment documentation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.