Allen-Bradley 2711P-RDT12C PanelView Plus 1250 Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDT12C PanelView Plus 1250 Display Module
Configured for operator display and touchscreen data entry in PanelView Plus systems, the Allen-Bradley 2711P-RDT12C (2711P-RDT12 Display Module) provides a 12.1 in color TFT LCD interface with 800 x 600 resolution and 8-wire analog resistive touch input.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDT12C |
| Brand | Allen-Bradley |
| Weight | 5.00 lb |
| Product Family | PanelView Plus Graphic Terminals |
| Product Line | PanelView Plus 1250 / PanelView Plus 6 1250 |
| Description | Display Module |
| Display Type | Color active matrix TFT LCD |
| Display Size | 12.1 in. |
| Resolution | 800 x 600 pixels |
| Color Depth | 18-bit color graphics |
| Luminance | 300 cd/m2 |
| Touch Technology | 8-wire analog resistive |
| Touch Life | 1 million actuations |
| Actuation Force | 10-110 g |
| Anti-Glare Overlay | Not included |
| Memory | 128 MB |
| Communication | Ethernet, RS-232, USB |
| Supply Voltage | 85-264 VAC |
| Compatibility | PanelView Plus 1000 / PanelView Plus 6 Touch terminals |
| Input Type | Touchscreen |
| Product Type | Operator Interface |
Industrial Control Communication Interfaces
The 2711P-RDT12C provides Ethernet, RS-232, and USB communication interfaces as specified for the associated PanelView Plus platform. The display module uses the touchscreen as the operator input path and presents 18-bit color graphics at 800 x 600 resolution.
The 8-wire analog resistive touch interface is physically separate from the display signal path. Touch operation is specified for 1 million actuations with an actuation force range of 10-110 g. No specific Ethernet protocol, deterministic network timing, or backplane communication velocity is stated in the supplied technical data and should not be assumed.
The module is identified as a display module for PanelView Plus terminals. System-level communication behavior therefore depends on the compatible terminal hardware and installed system configuration.
Frequently Asked Questions (FAQ)
Q: Is the 2711P-RDT12C a complete PanelView Plus terminal?
A: No. The supplied data identifies the 2711P-RDT12C as a Display Module. It provides the 12.1 in. TFT LCD and touchscreen interface rather than defining a complete terminal assembly.
Q: What touchscreen technology is used?
A: The module uses an 8-wire analog resistive touchscreen. The specified touch interface life is 1 million actuations, with an actuation force of 10-110 g.
Q: What communication interfaces are specified?
A: Ethernet, RS-232, and USB are specified. The supplied data does not define a specific Ethernet protocol or communication timing performance.
Field Installation Guidelines
- Verify that the replacement display module matches the installed PanelView Plus terminal configuration before installation.
- Isolate the terminal from its electrical supply before removing or installing the display module.
- Protect the TFT LCD surface from mechanical impact, excessive pressure, and contamination during installation.
- Keep the touchscreen surface free from conductive debris and foreign material.
- Route communication cables separately from high-energy power conductors where practical to reduce electrical interference.
- Maintain appropriate cable shielding and terminate shields according to the plant grounding and EMC design requirements.
- Do not apply mechanical force to the display area when securing the module.
- Verify all connectors are fully seated and mechanically retained before energizing the terminal.
- Confirm that the installed terminal is compatible with the 2711P-RDT12C display module before applying power.
- Do not assume hot-swap capability unless it is explicitly supported by the complete PanelView Plus terminal assembly documentation.
- Overall enclosure dimensions, operating temperature limits, and module power consumption are not specified in the supplied data and should be verified against the applicable Allen-Bradley documentation before installation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.