Allen-Bradley 2711P-RDT15C/B PanelView Plus 15-Inch Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDT15C/B PanelView Plus 15-Inch Display Module
Configured for operator visualization and touchscreen input in PanelView Plus and PanelView Plus 6 1500 terminals, the Allen-Bradley 2711P-RDT15C/B (2711P-RDT15 display module) provides the physical display and operator-input interface. It uses a 15.0-inch color active-matrix TFT LCD with 1024 x 768 XGA resolution and an analog resistive touchscreen. The C suffix identifies conformal coating on the internal circuit board.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDT15C/B |
| Brand | Allen-Bradley / Rockwell Automation |
| Product Line | PanelView Plus / PanelView Plus 6 1500 |
| Series | Series B |
| Product Type | 15.0-inch Display Module |
| Display Type | Color Active-Matrix TFT LCD |
| Display Size | 15.0 in diagonal |
| Display Area | 304 x 228 mm |
| Resolution | 1024 x 768 XGA |
| Aspect Ratio | 4:3 |
| Operator Input | Analog resistive touchscreen |
| Graphics | Color graphics |
| Conformal Coating | Yes |
| Enclosure Rating | NEMA 12, NEMA 13, NEMA 4X indoor only; IP65 / IP66 when panel mounted |
| Operating Temp | 0 to 55 deg C |
| Storage Temp | -25 to 70 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Operating Altitude | Up to 2000 m above sea level |
| Operating Shock | 15 G for 11 ms |
| Non-Operating Shock | 30 G for 11 ms |
| Heat Dissipation | About 240 BTU per hour |
| Weight | 7.38 lb |
PanelView Plus Interface and Firmware Compatibility
The 2711P-RDT15C/B is a display-side hardware component for the PanelView Plus and PanelView Plus 6 1500 terminal families identified in the supplied data. Its primary electrical functions are the TFT display interface and analog resistive touchscreen interface. The supplied specifications do not identify an independent communication interface, backplane bus velocity, or firmware revision requirement for this replacement display module. Firmware compatibility should therefore be verified against the complete terminal assembly and applicable Rockwell Automation documentation before replacement.
The conformal-coated circuit board provides an additional protective coating over the internal electronics. The supplied data specifically associates the coating with protection against corrosive atmospheres, dust, and moisture.
Frequently Asked Questions (FAQ)
Q: What touchscreen technology is used by the 2711P-RDT15C/B?
A: The module uses an analog resistive touchscreen for operator input.
Q: What are the display resolution and active display area?
A: The display resolution is 1024 x 768 XGA, with an active display area of 304 x 228 mm.
Q: Does the C suffix identify a hardware modification?
A: Yes. The supplied data identifies the C suffix as indicating conformal coating on the internal circuit board.
Field Installation Guidelines
- Confirm the replacement catalog number against the installed PanelView Plus or PanelView Plus 6 1500 terminal before installation.
- Disconnect electrical power before removing or installing the display assembly.
- Protect the TFT LCD surface and resistive touchscreen from impact, scratching, and contamination during handling.
- Ensure the panel cutout, mounting hardware, and sealing interface are compatible with the terminal assembly.
- Maintain the specified operating temperature and non-condensing humidity limits.
- Route display and touchscreen-related wiring separately from high-current switching conductors where practical to reduce electrical interference.
- Maintain appropriate cable shielding and bonding practices in accordance with the complete terminal installation requirements.
- Do not apply power until all mechanical connections and electrical interfaces are fully seated and secured.
- After installation, verify display image, touchscreen response, and enclosure sealing before returning the terminal to service.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.