Allen-Bradley 2711P-RDT7C PanelView Plus 700 Display Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RDT7C PanelView Plus 700 Display Module
Configured for local operator visualization and touch input in PanelView Plus and PanelView Plus 6 700 Series terminals, the Allen-Bradley 2711P-RDT7C (2711P-RDT7 display module) provides direct physical display and operator input functions through a 6.5 inch color TFT interface.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RDT7C |
| Brand | Allen-Bradley / Rockwell Automation |
| Product Series | PanelView Plus / PanelView Plus 6, 700 Series |
| Component Type | Replacement Display Module |
| Product Type | Operator Interface Display Module |
| Weight | 2.01 lb |
| Display Size | 6.5 inch diagonal |
| Display Type | Color active-matrix TFT LCD |
| Resolution | 640 x 480 VGA |
| Color Depth | 18-bit color, 262,144 colors |
| Touch Technology | Analog resistive touchscreen |
| Touch Actuation Force | 10-110 g |
| Luminance | 300 cd/m2 |
| Backlight | Replaceable CCFL for Series A-B; LED for Series C and later |
| Backlight Life | 50,000 hours minimum at 25 deg C, half-life |
| Operating Temp | 0 deg C to 55 deg C |
| Storage Temp | -25 deg C to 70 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Voltage | 85-264 VAC, as specified in supplied source data |
| Power Consumption | Not specified in supplied data |
| Installation | Field-replaceable display assembly |
| Touch Screen | Included |
Allen-Bradley PanelView Hardware Compatibility
The 2711P-RDT7C is a display-only assembly. It attaches to a compatible PanelView Plus logic module and power supply rather than providing the complete HMI terminal electronics.
The display provides 640 x 480 VGA graphics and analog-resistive touch input. The touchscreen is intended for direct operator interaction with graphical objects generated by the host PanelView terminal.
The supplied data identifies the component with the PanelView Plus / PanelView Plus 6 700 Series product family. Network functions such as EtherNet/IP or other host communications are associated with the compatible terminal logic module, not with the display assembly itself.
Backlight construction varies by hardware revision. Supplied data specifies replaceable CCFL backlighting for Series A-B and LED backlighting for Series C and later units. Replacement compatibility should therefore be checked against the terminal revision before installation.
Frequently Asked Questions
Q: Does the 2711P-RDT7C include the PanelView Plus logic module?
A: No. The supplied specifications identify it as a display-only replacement module. The compatible logic module and power supply are separate components.
Q: What touch technology is used?
A: The module uses an analog-resistive touchscreen with a specified actuation force of 10-110 g.
Q: Does the display module provide EtherNet/IP or other network communication?
A: No network interface is specified for the display assembly. Communication functions are provided by the compatible PanelView Plus terminal logic module.
Field Installation Guidelines
- Verify that the replacement display matches the PanelView Plus or PanelView Plus 6 700 Series terminal configuration before removal of the existing assembly.
- Disconnect terminal power before replacing the display module.
- Prevent contamination of the display and connector interfaces during installation.
- Engage the display assembly squarely with the compatible logic module and power supply assembly.
- Ensure all mechanical fasteners and retaining hardware are correctly seated before restoring power.
- Route signal and power wiring separately where practical to reduce coupling from high-current switching circuits.
- Maintain cable shielding and shield termination practices consistent with the installed PanelView terminal and site grounding scheme.
- Do not apply cleaning agents or mechanical pressure that could damage the LCD surface or resistive touch layer.
- After installation, verify display initialization, image quality, touchscreen response, and operator input before returning the terminal to service.
- Confirm backlight revision compatibility when replacing assemblies from different PanelView hardware series.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.