Allen-Bradley 2711P-RN15C ControlNet Communication Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RN15C ControlNet Communication Module
Configured for ControlNet communication in PanelView Plus 400/600 terminals, the Allen-Bradley 2711P-RN15C (2711P-RN15C ControlNet Communication Module) provides a physical network interface using 5 Mbps ControlNet signaling, BNC connectivity, and RG-6 coaxial cabling.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RN15C |
| Brand | Allen-Bradley |
| Product Type | ControlNet Communication Module |
| Product Series | PanelView Plus |
| Compatible HMI | PanelView Plus 400/600 |
| Network Protocol | ControlNet (CNET) |
| Network Data Rate | 5 Mbps |
| Maximum Network Nodes | 99 nodes |
| Cable Type | RG-6 coaxial |
| Connector Type | BNC |
| Maximum Segment Distance | 1000 m |
| Module Power Source | HMI terminal powered |
| Status Indicators | Diagnostic LEDs |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Relative Humidity | 5 to 95% non-condensing |
| Weight | 0.56 lb |
ControlNet Communication Characteristics
The 2711P-RN15C provides the ControlNet physical interface for compatible PanelView Plus 400/600 terminals. The supplied specification identifies a 5 Mbps network data rate, BNC connection, and RG-6 coaxial cable interface. The specified maximum network capacity is 99 nodes, with a maximum segment distance of 1000 m.
The module receives its operating power from the HMI terminal rather than from a separately specified external module power supply. Diagnostic LEDs provide local status indication.
The supplied material does not define firmware revision compatibility, firmware update procedures, or specific ControlNet firmware requirements. These parameters should therefore be verified against the installed PanelView Plus terminal and applicable Rockwell Automation documentation before firmware service.
Frequently Asked Questions (FAQ)
Q: Does the 2711P-RN15C require a separate external power supply?
A: The supplied specifications state that the module is powered by the HMI terminal. No separate external module power supply is specified.
Q: What physical network connection does the module use?
A: The specified network interface uses a BNC connector with RG-6 coaxial cable for ControlNet communication.
Q: What are the specified ControlNet network limits?
A: The supplied data specifies a 5 Mbps network data rate, up to 99 nodes, and a maximum segment distance of 1000 m.
Field Installation Guidelines
- Confirm that the PanelView Plus terminal is a compatible 400/600 series unit before installing the communication module.
- Install the module according to the terminal manufacturer's mechanical installation procedure and ensure that it is fully seated in its intended interface position.
- Use the specified BNC connection and RG-6 coaxial cable for the ControlNet network connection.
- Route network cabling separately from high-voltage power conductors and high-current switching wiring where practical to reduce electrical interference.
- Maintain proper cable shielding and grounding practices in accordance with the ControlNet installation specification applicable to the system.
- Inspect BNC connectors for secure mechanical engagement and correct termination before applying network power.
- Verify network topology, node addressing, and segment length against the ControlNet network design before commissioning.
- Confirm the installed terminal firmware and communication module firmware compatibility before performing any firmware update.
- The supplied data contains two different weight values: 0.56 lb (0.26 kg) in the technical specification table and 0.31 lb in the additional product notes. The applicable manufacturer documentation should be used to resolve this discrepancy for installation records.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.