Allen-Bradley 2711P-RN6 PanelView Plus DH+/RIO/DH-485 Communication Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RN6 PanelView Plus DH+/RIO/DH-485 Communication Module
Configured for DH+, Remote I/O (RIO), and DH-485 network communication in PanelView Plus operator terminals, the Allen-Bradley 2711P-RN6 (2711P-RN6 communication module) provides direct physical communication interfaces for supported PanelView Plus, PanelView Plus CE, and PanelView Plus 6 terminals. The module provides one DH+/RIO port, one DH-485 port, and status LED indication.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RN6 |
| Brand | Allen-Bradley |
| Product Type | Communication Module |
| Product Line | PanelView Plus |
| Compatible Product Family | PanelView Plus / PanelView Plus CE / PanelView Plus 6 Operator Terminals |
| Supported Operator Terminals | PanelView Plus 700-1500; PanelView Plus CE 700-1500; PanelView Plus 6 700-1500 |
| Communication Interfaces | 1 x DH+/RIO; 1 x DH-485 |
| Communication | DH+, RIO, DH-485, RS-232 |
| DH+/RIO Connector | 1 x DH+/RIO interface |
| DH-485 Connector | 1 x 6-pin Phoenix connector |
| RS-232 Connector | 1 x 9-pin D-plug connector |
| Network Access Port (NAP) | None |
| DH-485 Cable | Belden 3106A or 9842 |
| DH+/RIO Cable | Belden 9463 twin-axial or equivalent |
| Maximum DH+/RIO Trunk Cable Length | 3048 m (10,000 ft) |
| Status Indication | Module operational-state status LEDs |
| Removal and Insertion Under Power | Not specified in supplied data |
| Retaining Screw | M3, 5 mm long |
| Weight | 1.31 lb |
DH+ / RIO Network Interface Characteristics
The 2711P-RN6 provides one DH+/RIO communication interface for PanelView Plus terminal connectivity. The specified DH+/RIO trunk cable is Belden 9463 twin-axial cable or an equivalent cable, with a stated maximum trunk length of 3048 m (10,000 ft). The module also provides one DH-485 interface and supports the specified Belden 3106A or 9842 communication cable.
The module includes status LEDs for indication of the module operational state. The supplied data identifies the communication interfaces as DH+, RIO, DH-485, and RS-232.
Frequently Asked Questions
Q: Which PanelView terminal families are supported by the 2711P-RN6?
A: The supplied specifications identify PanelView Plus 700-1500, PanelView Plus CE 700-1500, and PanelView Plus 6 700-1500 terminals as supported product families.
Q: What cable is specified for the DH+/RIO interface?
A: Belden 9463 twin-axial cable or an equivalent cable is specified for DH+/RIO communication. The stated maximum DH+/RIO trunk cable length is 3048 m (10,000 ft).
Q: Does the module provide a Network Access Port?
A: No. The supplied specifications identify the Network Access Port (NAP) as none.
Field Installation Guidelines
Install the module in the designated communication-module position of the compatible PanelView Plus terminal and secure it using the specified M3, 5 mm retaining screw.
Route DH+/RIO and DH-485 communication cables separately from high-voltage power conductors and high-current switching circuits where practical. Maintain appropriate separation to reduce electromagnetic interference.
Use the specified cable types or equivalent cables suitable for the corresponding communication network. Terminate and shield communication cables according to the applicable network installation requirements.
Verify connector seating and retaining hardware before energizing the terminal. Do not apply power to an installation condition that is not supported by the equipment documentation.
Connect communication cable shields and signal references according to the applicable network grounding practice. Avoid creating unintended ground paths through multiple shield termination points unless required by the network design.
Confirm that the selected terminal is within the supported PanelView Plus family and that the communication interface corresponds to the intended DH+, RIO, or DH-485 network before commissioning.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.