Allen-Bradley 2711P-RP9D PanelView Plus 6 Logic Module
$123.00
$320.00
Description
Allen-Bradley 2711P-RP9D PanelView Plus 6 Logic Module
Configured for HMI application execution in PanelView Plus 6 terminal configurations, the Allen-Bradley 2711P-RP9D (2711P-RP9D Logic Module) provides the CPU, system memory, display interface, communication ports, and firmware required for FactoryTalk View Machine Edition applications. It mounts directly to compatible PanelView Plus 6 display modules from the 700 through 1500 series.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-RP9D |
| Brand | Allen-Bradley / Rockwell Automation |
| Product Line | PanelView Plus 6 |
| Module Type | Logic Module |
| Weight | 2.01 lb |
| Input Voltage | 18-32 VDC, 24 VDC nominal |
| Power Consumption | 70 W maximum, 2.9 A at 24 VDC |
| System Memory | 512 MB RAM |
| Non-Volatile Memory | 512 MB Flash, approximately 79 MB available for user storage |
| Operating System | Windows CE 6.0 |
| Operating Temperature | 0 deg C to 55 deg C |
| Storage Temperature | -25 deg C to 70 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Ethernet Interface | 1 x RJ-45, 10/100 Mbps |
| Serial Interface | 1 x RS-232 |
| USB Host Ports | 2 x USB 2.0 Type A |
| USB Device Port | 1 x USB 2.0 Type B |
| Removable Storage | 1 x SD Card slot |
| Compatible Displays | PanelView Plus 6 display modules, 700, 1000, 1200, and 1500 series |
| Application Platform | FactoryTalk View Machine Edition |
PanelView Plus 6 Processing and Communication Architecture
The 2711P-RP9D provides the processing hardware required by compatible PanelView Plus 6 display modules. Its 512 MB RAM supports runtime execution, while 512 MB Flash provides non-volatile system and application storage.
The module provides Ethernet communication through an RJ-45 10/100 Mbps interface. It also includes an RS-232 serial interface and separate USB host and device interfaces.
For Allen-Bradley industrial control architectures, communication configuration must match the selected PanelView Plus 6 terminal and installed FactoryTalk View ME application requirements. Ethernet cabling should remain separated from high-current power conductors where practical to limit conducted and radiated interference.
Frequently Asked Questions
Q: What display modules are compatible with the 2711P-RP9D?
A: The supplied data identifies compatibility with PanelView Plus 6 display modules in the 700, 1000, 1200, and 1500 series.
Q: What communication interfaces are provided by the logic module?
A: The module provides one 10/100 Mbps Ethernet port, one RS-232 port, two USB 2.0 host ports, and one USB 2.0 device port.
Q: What supply voltage does the 2711P-RP9D require?
A: The specified DC input range is 18-32 VDC, with 24 VDC identified as the nominal supply voltage.
Field Installation Guidelines
Mount the logic module onto the designated rear interface of a compatible PanelView Plus 6 display module.
Verify the display module series before installation, because compatibility is specified by PanelView Plus 6 terminal family and display size.
Apply a DC supply within the specified 18-32 VDC input range and observe correct polarity during wiring.
Use appropriately rated conductors for the specified maximum power demand and secure all terminal connections against mechanical loosening.
Route Ethernet and RS-232 signal wiring separately from high-current AC or DC conductors where installation conditions permit.
Avoid routing communication cables alongside contactor, motor, solenoid, or other high-noise switching circuits for extended distances.
Connect cable shields according to the plant grounding architecture and avoid creating unintended ground loops through multiple shield termination points.
Provide adequate enclosure ventilation around the terminal assembly and maintain the specified operating temperature range.
Before commissioning, verify the installed firmware, FactoryTalk View ME application compatibility, communication settings, and configured peripheral devices.
Use the USB and SD interfaces only for functions supported by the installed PanelView Plus 6 system configuration.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.