Allen-Bradley 2711P-T10C4A8 PanelView Plus 6 Operator Interface Terminal
$123.00
$320.00
Description
Allen-Bradley 2711P-T10C4A8 PanelView Plus 6 Operator Interface Terminal
Configured for operator visualization and touch-based control in EtherNet/IP and RS-232 systems, the Allen-Bradley 2711P-T10C4A8 (2711P operator interface terminal) provides direct HMI interaction through a 10.4-inch resistive touchscreen. The terminal uses a 640 x 480 VGA color TFT display and accepts 85-264 V AC input.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-T10C4A8 |
| Base Model | 2711P |
| Brand | Allen-Bradley |
| Manufacturer | Rockwell Automation |
| Product Family | PanelView Plus 6, 1000 Series |
| Product Type | Operator Interface Terminal |
| Weight | 5.11 lb |
| Operating Temp | 0 deg C to 55 deg C |
| Power Consumption | 85 VA maximum |
| Display Type | Color active-matrix TFT |
| Display Size | 10.4 in diagonal |
| Display Resolution | 640 x 480 pixels, VGA |
| Color Depth | 18-bit, 262,144 colors |
| Touch Input | Analog resistive touchscreen |
| Input Voltage | 85-264 V AC |
| Input Frequency | 47-63 Hz |
| System Memory | 512 MB RAM |
| Non-Volatile Storage | 512 MB Flash |
| User Storage | Approximately 79 MB |
| Expansion Storage | SD card slot |
| Ethernet | 1 x 10/100 Base-T EtherNet/IP |
| Serial Communication | 1 x RS-232 |
| USB Host | 2 x USB 2.0 Type A |
| USB Device | 1 x USB Type B |
| Enclosure Ratings | NEMA 12, NEMA 13, NEMA 4X indoor, IP54, IP65 |
| Mounting | Panel mount |
| Operating System | Windows CE 6 |
PanelView Plus 6 Communication and I/O Architecture
The 2711P-T10C4A8 provides Ethernet communication through one 10/100 Base-T interface configured for EtherNet/IP connectivity. The dedicated RS-232 interface supports serial communication where a direct serial connection is required.
Two USB 2.0 host ports provide connections for compatible USB peripherals, while the USB device port supports host-computer connectivity. The SD card interface provides removable storage for supported application and data requirements.
The display uses an analog resistive touchscreen with 640 x 480 VGA resolution. Therefore, operator input is performed through direct touch interaction rather than physical keypad hardware.
The terminal accepts 85-264 V AC at 47-63 Hz and has a maximum specified consumption of 85 VA. Internal memory consists of 512 MB RAM and 512 MB Flash storage.
Frequently Asked Questions
Q: What touchscreen technology does the 2711P-T10C4A8 use?
A: The terminal uses an analog resistive touchscreen integrated with the 10.4-inch color TFT display.
Q: Which physical communication interfaces are provided?
A: The unit provides one 10/100 Base-T EtherNet/IP port, one RS-232 port, two USB 2.0 host ports, and one USB device port.
Q: Can the terminal operate from standard AC input ranges?
A: The specified input range is 85-264 V AC at 47-63 Hz, with maximum consumption rated at 85 VA.
Field Installation Guidelines
- Verify the panel cutout and mounting hardware against the applicable PanelView Plus 6 installation documentation before installation.
- Install the terminal in a panel position that maintains access to communication, power, and removable storage interfaces.
- Route AC power wiring separately from low-level communication and signal wiring to reduce conducted interference.
- Maintain proper protective earth and panel bonding according to the applicable electrical installation standard.
- Use shielded communication cabling where required by the installed EtherNet/IP network design and electromagnetic environment.
- Terminate cable shields according to the network installation standard and avoid uncontrolled shield connections at multiple points.
- Keep Ethernet and RS-232 cables away from high-current switching conductors, motor leads, and variable-frequency drive output wiring.
- Confirm that the enclosure environment remains within the specified 0 deg C to 55 deg C operating temperature range.
- Confirm that the completed panel assembly maintains the required enclosure rating after installation and cable entry.
- Apply AC power only after verifying input voltage, frequency, protective earth, terminal polarity, and wiring integrity.
- Do not disconnect or install communication wiring while energized unless the applicable equipment documentation explicitly permits that procedure.
- Use the supported SD card interface and USB ports according to the applicable PanelView Plus 6 hardware and software documentation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.