Allen Bradley 2711P-T6M20D PanelView Plus 600 Operator Interface Terminal
$123.00
$320.00
Description
Allen Bradley 2711P-T6M20D PanelView Plus 600 Operator Interface Terminal
Configured for touchscreen operator interaction in PanelView Plus 600 systems, the Allen Bradley 2711P-T6M20D (2711P-T6M20D Operator Interface Terminal) provides direct graphical control through a 5.5 in grayscale FSTN display, resistive touch input, Ethernet, RS-232, and USB interfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2711P-T6M20D |
| Brand | Allen Bradley |
| Series | PanelView Plus 600 |
| Module Type | Operator Interface Terminal |
| Weight | 2 lb |
| Power Consumption | 25 W max; 1.0 A at 24 VDC |
| Power Supply | 18-30 VDC input; nominal 24 VDC |
| Display Type | Grayscale passive matrix, film compensated super-twist nematic (FSTN) |
| Display Size | 5.5 in |
| Display Area | 112 x 84 mm |
| Resolution | 320 x 240 pixels |
| Touch Interface | Analog resistive |
| Operating Force | 10-110 g |
| Actuating Lifespan | 1 million presses |
| Operator Input | Touch |
| Communication Ports | 1 Ethernet, 1 RS-232, 2 USB host |
| Terminal Memory | Series A: 5 MB; Series B: 10 MB |
| Product Family | PanelView Plus Graphic Terminals |
| UPC | 781180130243 |
Allen Bradley PanelView Plus Communication and HMI Characteristics
The 2711P-T6M20D combines graphical display processing with local touchscreen input for operator interface functions. Its analog resistive touch interface accepts physical contact across the configured display area.
Ethernet provides network communication, while RS-232 supports serial device connections. Two USB host ports provide local peripheral connectivity where supported by the terminal configuration.
The supplied specifications identify Series A and Series B memory variants. Therefore, terminal memory capacity should be verified against the installed hardware series before application deployment or firmware-related maintenance.
The grayscale FSTN display provides 320 x 240 pixel resolution over a stated 112 x 84 mm active display area. The specified maximum power consumption is 25 W at a 24 VDC supply condition.
Frequently Asked Questions
Q: What DC supply range is specified for the 2711P-T6M20D?
A: The terminal accepts an external supply from 18-30 VDC, with 24 VDC identified as the nominal supply.
Q: What communication interfaces are provided on the terminal?
A: The supplied data specifies 1 Ethernet port, 1 RS-232 port, and 2 USB host ports.
Q: Does the terminal use a resistive or capacitive touchscreen?
A: The specified touch interface is analog resistive, with an operating force of 10-110 g and a stated lifespan of 1 million presses.
Field Installation Guidelines
Install the terminal in a panel cutout that matches the mechanical dimensions specified by the applicable Allen Bradley installation documentation.
Provide a regulated DC supply within the specified 18-30 VDC input range and observe the required wiring polarity.
Separate DC power wiring from high-current switching conductors, motor cables, and other sources of conducted or radiated electrical noise.
Route Ethernet and RS-232 communication cables separately from power conductors where practical, particularly around contactors, drives, and switching loads.
Terminate communication cable shields according to the system grounding design and the applicable Allen Bradley installation requirements.
Use the Ethernet connection only with network equipment and cabling compatible with the configured PanelView Plus 600 communication architecture.
Do not assume hot-swap capability for field replacement unless the applicable hardware and installation documentation explicitly permits energized removal or insertion.
Verify the terminal hardware series before loading application files or firmware because the supplied data identifies different memory capacities for Series A and Series B hardware.
Confirm display operation, touchscreen response, Ethernet communication, RS-232 communication, and USB device operation after installation and before placing the terminal into service.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.