Allen-Bradley 2713P-T7WD1 PanelView 5310 Operator Interface Terminal
$123.00
$320.00
Description
Allen-Bradley 2713P-T7WD1 PanelView 5310 Operator Interface Terminal
Configured for touchscreen visualization and Ethernet communication in ControlLogix 5570, ControlLogix 5580, and CompactLogix L1, L2, and L3 systems, the Allen-Bradley 2713P-T7WD1 (2713P-T7WD1 PanelView 5310 operator interface terminal) provides direct operator interaction with controller data.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2713P-T7WD1 |
| Brand | Allen-Bradley |
| Product Line | PanelView 5310 |
| Product Type | Operator Interface Terminal |
| Weight | 3.75 lb |
| Power Consumption | 9 W |
| Supply Voltage | 18-30 VDC |
| Nominal Input | 24 VDC |
| Display Size | 7 inches |
| Display Type | TFT color |
| Display Resolution | 800 x 480 WVGA |
| Display Area | 152 x 91 mm (6.0 x 3.6 in.) |
| Operator Input | Touch |
| Touchscreen Type | Analog resistive touchscreen |
| Actuation Rating | 1 million presses |
| Operating Force | 100 grams |
| Backlight Half-Life | 50,000 hours |
| Application Memory | 1 GB RAM and 1 GB storage |
| HMI Memory | 1 GB RAM and storage |
| Ethernet Ports | 1 |
| USB Ports | 2 |
| Communications | Ethernet and USB |
| Compatible Controllers | ControlLogix 5570, ControlLogix 5580, CompactLogix L1, L2, and L3 |
| Aspect Ratio | 5:03 |
Industrial Control and Network Interface Characteristics
The 2713P-T7WD1 provides one Ethernet communication interface for connection with supported Logix controller platforms.
Two USB ports provide additional physical communication interfaces specified for the PanelView 5310 terminal.
Controller compatibility includes ControlLogix 5570, ControlLogix 5580, and CompactLogix L1, L2, and L3 platforms.
Therefore, network configuration should match the controller communication architecture and assigned PanelView application settings.
The 800 x 480 WVGA display presents controller and application information through a color TFT interface.
Its analog resistive touchscreen uses direct physical actuation and has a rated capacity of 1 million presses.
The external 18-30 VDC supply range defines the electrical input requirement for terminal operation.
The supplied data specifies 9 W power consumption at the 24 VDC input condition.
Frequently Asked Questions
Q: What supply voltage does the 2713P-T7WD1 require?
A: The terminal accepts an external 18-30 VDC supply, with 24 VDC specified as the nominal input.
Q: Which communication interfaces are provided on the terminal?
A: The supplied specifications identify one Ethernet interface and two USB ports.
Q: Which controller families are identified as compatible with this terminal?
A: The listed platforms are ControlLogix 5570, ControlLogix 5580, and CompactLogix L1, L2, and L3.
Field Installation Guidelines
Mount the terminal according to the mechanical requirements of the selected enclosure and panel cutout.
Verify that the installation provides adequate clearance for the rear connectors and connected cables.
Apply the specified 18-30 VDC supply through correctly rated field wiring and protection devices.
Confirm polarity before energizing the DC input because reverse wiring can damage electronic equipment.
Route Ethernet communication wiring separately from high-voltage power conductors and high-noise switching circuits.
Avoid excessive cable bending, mechanical tension, and unsupported connector loads during installation.
Terminate protective grounding and shield connections according to the applicable panel grounding architecture.
Keep communication cable shields continuous where required by the selected network installation standard.
Verify Ethernet configuration, controller addressing, and application communication settings before placing the terminal into service.
Inspect USB and Ethernet connectors for secure engagement before applying operating power.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.