Allen-Bradley 41391-454-01-S1FX SMC-FLEX Control Module
$123.00
$320.00
Description
Allen-Bradley 41391-454-01-S1FX SMC-FLEX Control Module
Configured for control-module operation in industrial automation systems, the Allen-Bradley 41391-454-01-S1FX (150-FS1FX Control Module) provides a 24 VDC nominal interface for control and bus-connected hardware functions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 41391-454-01-S1FX |
| Base Model | 150-FS1FX |
| Brand | Allen-Bradley |
| Product Type | SMC-FLEX Control Module |
| Weight | 2.01 lbs |
| Operating Voltage | 24 VDC nominal |
| Operating Temp | -20 deg C to +60 deg C |
| Storage Temperature | -40 deg C to +85 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Power Consumption | Not specified in supplied data |
| Enclosure Rating | IP20 / NEMA Type 1 |
| Communication / Signal Type | Standard industrial interface / bus connection |
| Mounting Type | DIN rail / direct panel mount |
| Functional Type | Industrial automation control module |
| Referenced Series | SMC-FLEX |
| Referenced Supply | 120-240 VAC |
Allen-Bradley Control Interface Characteristics
The supplied identification associates the hardware with the SMC-FLEX platform and the 150-FS1FX reference. The stated 24 VDC nominal operating voltage defines the specified control-side electrical requirement, while the supplied documentation does not identify a specific communication protocol.
The module supports DIN rail or direct panel mounting according to the supplied mechanical description. Therefore, installation should maintain adequate clearance for terminal access, conductor routing, and enclosure requirements.
The IP20 / NEMA Type 1 classification indicates protection against contact with internal energized parts under specified enclosure conditions, but it does not provide protection against water ingress.
Frequently Asked Questions
Q: What operating voltage is specified for the 41391-454-01-S1FX?
A: The supplied data specifies a nominal operating voltage of 24 VDC.
Q: Can the module be installed on a DIN rail?
A: Yes. The supplied specifications identify DIN rail and direct panel mounting as supported mounting methods.
Q: Does the supplied documentation specify power consumption?
A: No. A numerical power-consumption value is not provided and should be verified against the applicable hardware documentation.
Field Installation Guidelines
Install the module on a mechanically secure DIN rail or suitable panel surface before terminating conductors. Verify that the mounting surface provides adequate mechanical support and maintains the enclosure classification.
Route control and communication conductors separately from high-current switching conductors where practical. Maintain physical separation from motor, contactor, and other high-noise wiring to reduce conducted and radiated interference.
Use shielded communication or signal cables where required by the connected system. Terminate cable shields according to the system grounding architecture rather than creating unintended ground loops.
Verify the 24 VDC supply polarity and nominal voltage before energization. Do not apply the referenced 120-240 VAC supply directly to a connection identified for 24 VDC operation.
Maintain the specified -20 deg C to +60 deg C operating temperature range and avoid installation locations exposed to condensation. The stated 5% to 95% relative humidity range applies to non-condensing conditions.
Confirm all terminal assignments, wiring restrictions, and applicable SMC-FLEX installation requirements against the hardware documentation before commissioning.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.