Allen-Bradley 500F-FOD930 Fiber Optic Link Module
$123.00
$320.00
Description
Allen-Bradley 500F-FOD930 Fiber Optic Link Module
Configured for electrical-to-optical signal conversion in industrial communication networks, the Allen-Bradley 500F-FOD930 (500F-FOD930 Fiber Optic Link Module) provides direct physical signal transmission and isolation functions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 500F-FOD930 |
| Brand | Allen-Bradley / Rockwell Automation |
| Origin | United States |
| Weight | 20.20 lbs |
| Operating Temp | -20 deg C to +60 deg C |
| Module Type | Fiber Optic Link / Transceiver Module |
| Interface Type | Fiber optic interface, connector configuration dependent |
| Communication Medium | Multimode or single-mode optical fiber dependent on variant |
| Wavelength | Approximately 850 nm or 1310 nm dependent on sub-variant |
| Data Transmission Rate | Up to 100 Mbps or 1 Gbps dependent on protocol integration |
| Operating Voltage | 24 VDC nominal |
| Isolation | Galvanic isolation for ground loop and EMI/RFI reduction |
| Enclosure Rating | IP20 / NEMA industrial control cabinet installation |
| Diagnostic Function | Front-panel LED status indicators for power, signal, and fault conditions |
EtherNet/IP Network Fiber Conversion Characteristics
The Allen-Bradley 500F-FOD930 provides optical signal conversion for industrial communication links requiring electrical isolation and reduced electromagnetic interference exposure. The module supports fiber-based transmission paths where copper communication limitations affect distance, grounding, or noise performance.
The fiber interface separates communication conductors from field grounding systems through galvanic isolation. Additionally, optical transmission reduces susceptibility to EMI and RFI generated by industrial switching equipment, motor drives, and power distribution systems.
The module integrates with Allen-Bradley control architectures where fiber communication links require deterministic network behavior. Profinet and EtherNet/IP deterministic networks are not generated by the module itself but depend on the connected automation platform configuration.
Frequently Asked Questions
Q: Does the 500F-FOD930 provide electrical isolation between connected communication segments?
A: Yes. The module uses galvanic isolation through optical transmission to reduce ground loop effects and electrical interference coupling.
Q: What installation factors affect fiber communication performance?
A: Fiber type, connector condition, bending radius, optical cleanliness, and correct grounding of associated cabinet equipment affect communication quality.
Q: Can the module be installed directly on a PLC backplane?
A: Installation depends on the specific Allen-Bradley system architecture and mounting requirements defined for the associated hardware platform.
Field Installation Guidelines
Install the 500F-FOD930 inside an industrial control cabinet with suitable mechanical protection and environmental control. Verify fiber connector compatibility before installation because optical interface types depend on the configured module variant.
Route fiber cables separately from high-voltage power conductors and high-frequency switching sources. Maintain proper fiber handling procedures, including protection against excessive bending, mechanical stress, and connector contamination.
Connect cabinet grounding according to industrial electrical standards. Fiber communication provides signal isolation, but associated power supply and cabinet components still require correct protective grounding.
Verify LED diagnostic indicators after power application to confirm operating status. Record optical link conditions and network parameters during commissioning for future maintenance reference.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.