Allen-Bradley 5069-IB16 Compact 5000 I/O Digital Input Module
$123.00
$320.00
Description
Allen-Bradley 5069-IB16 Compact 5000 I/O Digital Input Module
Configured for 24 VDC field signal acquisition in CompactLogix 5380, ControlLogix 5580, and Compact 5000 EtherNet/IP adapter systems, the Allen-Bradley 5069-IB16 (5069-IB16 Digital Input Module) provides direct physical/electrical execution for ON/OFF signal detection through 16 sinking input channels.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 5069-IB16 |
| Brand | Allen-Bradley / Rockwell Automation |
| Origin | United States |
| Product Series | Compact 5000 I/O |
| Product Type | Digital Sinking Input Module |
| Input Channels | 16 channels, 1 input group |
| Input Type | Digital Sinking Input, 24 VDC Sink |
| Nominal Input Voltage | 24 VDC |
| Operating Voltage | 10 to 32 VDC |
| On-State Voltage | 10 to 32 VDC |
| Off-State Voltage | 0 to 5 VDC |
| On-State Current | 2.0 to 5.5 mA |
| Off-State Current | 1.5 mA maximum |
| MOD Power Voltage | 18 to 32 VDC |
| MOD Power Current | 75 mA maximum |
| SA Power Voltage | 10 to 32 VDC |
| SA Power Current | 4 A maximum pass-through |
| Module Isolation Voltage | 250 V continuous, basic insulation |
| Input Filter Time | OFF to ON and ON to OFF configurable: 0 ms, 0.1 ms, 0.2 ms, 0.5 ms, 1 ms, 2 ms, 5 ms, 10 ms, 20 ms |
| Removable Terminal Block | 5069-RTB18-SPRING or 5069-RTB18-SCREW |
| Mounting Method | DIN Rail, EN 50022 35 x 7.5 mm or 35 x 15 mm |
| Enclosure Type | Open style |
| Operating Temp | 0 deg C to 60 deg C |
| Weight | 0.26 lbs |
| Power Consumption | MOD power current 75 mA maximum |
EtherNet/IP Backplane Communication and I/O Scaling
The 5069-IB16 operates within the Compact 5000 I/O architecture and exchanges input status data through high-speed backplane communication. The module supports I/O density scaling for CompactLogix and ControlLogix platforms by providing sixteen discrete input points in a compact DIN rail installation format.
The module firmware compatibility follows the Compact 5000 I/O platform requirements for controller recognition, configuration, and diagnostic functions. Therefore, controller firmware and module revision compatibility must be verified before system commissioning.
The sinking input design receives current from connected field devices and reports digital state changes to the controller system. Additionally, configurable input filter timing allows adjustment of signal response behavior according to field device switching characteristics.
Frequently Asked Questions
Q: What type of field signals can the 5069-IB16 process?
A: The module processes 24 VDC discrete ON/OFF signals from devices such as push buttons, limit switches, and photoelectric sensors through sinking input channels.
Q: Can the 5069-IB16 be installed without an enclosure?
A: The module uses an open-style enclosure rating and requires installation within an appropriate industrial cabinet or protected mounting environment.
Q: What terminal connection options are available for this module?
A: The module supports 5069-RTB18-SPRING and 5069-RTB18-SCREW removable terminal blocks for field wiring connections.
Field Installation Guidelines
Install the 5069-IB16 on an EN 50022 compatible DIN rail with adequate mechanical support and cabinet protection. Verify that the removable terminal block type matches the planned wiring method before field connection.
Separate input signal wiring from high-voltage power conductors and high-noise switching circuits to reduce electromagnetic interference. Use appropriate shield grounding practices when connected field devices require shielded cables.
Confirm that the 24 VDC field supply polarity, input common wiring, and sinking input configuration match the connected devices. Before startup, check controller recognition, module diagnostics, and field signal response through the automation software configuration environment.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.