Allen Bradley 5069-RTB18-SCREW CompactLogix 5069 Terminal Block
$123.00
$320.00
Description
Allen Bradley 5069-RTB18-SCREW CompactLogix 5069 Terminal Block
The Allen Bradley 5069-RTB18-SCREW, also cataloged as the 5069-RTB18-SCREW Terminal Block, provides direct electrical wire termination for CompactLogix 5069 series I/O module connections.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 5069-RTB18-SCREW |
| Brand | Allen Bradley |
| Product Type | Terminal Block |
| Product Series | CompactLogix 5069 |
| Weight | 0.13 lbs |
| Operating Temp | 0 to 60 deg C |
| Storage Temperature | -40 to 85 deg C |
| Power Consumption | Passive terminal component; no external power consumption |
| Pin Configuration | 18 pins |
| Connection Type | Screw type single-wire connections |
| Wire Gauge | 22 to 16 AWG |
| Wire Type | Shielded copper wire, solid or stranded, rated for at least 105 deg C |
| Maximum Wire Diameter | 3.5 mm including insulation |
| Insulation Stripping Length | 12 mm |
| Torque Rating | 0.4 Nm |
| Keying Requirement | None |
| Relative Humidity | 5 to 95% non-condensing |
| Mounting Style | Open style, mountable |
EtherNet/IP and CompactLogix I/O Connection Interface
The 5069-RTB18-SCREW terminal block is designed for physical signal termination on CompactLogix 5069 series I/O assemblies. The component provides screw-clamp wire retention for field conductors and maintains the mechanical connection between external wiring and module terminal interfaces.
The terminal block supports shielded copper conductors with single-wire connections. Proper conductor preparation requires maintaining the specified stripping length and applying the correct tightening torque to prevent loose connections or conductor damage.
The CompactLogix 5069 platform uses modular I/O architecture, where terminal blocks provide the field wiring interface for installed I/O modules. The 5069-RTB18-SCREW is a passive connection accessory and does not execute control logic or process communication functions.
Frequently Asked Questions
Q: Does the 5069-RTB18-SCREW terminal block require firmware compatibility?
A: No. The terminal block is a passive electrical connection component and does not contain firmware or configurable processing functions.
Q: What conductor types are supported by the 5069-RTB18-SCREW?
A: The terminal block supports shielded copper solid or stranded wires within the specified 22 to 16 AWG range.
Q: Is the terminal block designed for hot-swap operation?
A: Hot-swap capability depends on the associated CompactLogix 5069 I/O module installation procedure. Field wiring changes should follow the applicable system safety and maintenance requirements.
Field Installation Guidelines
Install the 5069-RTB18-SCREW only with compatible CompactLogix 5069 series I/O modules and verify the terminal assignment before wiring.
Use shielded copper conductors where required by the application. Connect cable shields according to the system grounding design to reduce electromagnetic interference.
Route signal wiring separately from high-voltage power conductors and high-current switching circuits. Maintain appropriate cable separation based on site electrical installation practices.
Inspect conductor stripping length before insertion and tighten terminal screws using the specified torque value. Avoid excessive tightening that may deform conductors or damage the terminal connection.
Verify terminal block seating, mechanical retention, and wiring identification before applying system power.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.