Allen Bradley 5094-IY8 FLEX 5000 Analog Input Module
$123.00
$320.00
Description
Allen Bradley 5094-IY8 FLEX 5000 Analog Input Module
Configured for multi-signal analog acquisition in FLEX 5000 I/O systems, the Allen Bradley 5094-IY8 (5094-IY8 Analog Input Module) provides direct physical/electrical execution for voltage, current, RTD, and thermocouple measurement channels. The module supports 8 differential or single-ended inputs with Sigma-Delta conversion using multiplexed 24-bit ADC technology.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 5094-IY8 |
| Brand | Allen Bradley |
| Module Type | Analog 8-channel Current/Voltage/RTD/Thermocouple Input Module |
| Product Line | FLEX 5000 |
| Weight | 0.99 lbs |
| Power Consumption | 24 VDC supply required; module power consumption not specified |
| Input Channels | 8 differential/single-ended analog inputs |
| Input Mode | Differential and single-ended supported |
| Voltage Input Range | +/-10 V, 0 to 10 V, 0 to 5 V |
| Current Input Range | 0 to 20 mA, 4 to 20 mA |
| Resistive Input Range | 1 to 500 ohm, 2 to 1000 ohm, 4 to 2000 ohm, 8 to 4000 ohm |
| RTD Input Types | Platinum and nickel RTD sensors with supported alpha coefficients |
| Thermocouple Input Range | +/-100 mV |
| Thermocouple Types | B, C, D, E, J, K, L (TXK/XK), N, R, S, T |
| Voltage Input Impedance | Greater than 1 Mohm |
| Current Input Impedance | 90 ohm typical, 70 to 110 ohm range |
| RTD Input Impedance | Greater than 1 Mohm |
| ADC Conversion Method | Sigma-Delta, two 24-bit multiplexed ADC analog input architecture |
| Common Mode Voltage | +/-10 V for differential mode |
| Terminal Base | Required separately; not included with module |
EtherNet/IP Deterministic I/O and FLEX 5000 Integration
The 5094-IY8 operates as a FLEX 5000 analog acquisition module within Allen Bradley distributed I/O architectures. The module receives field-side signals through a separate terminal base, allowing wiring termination independent from the removable electronic module.
The module supports Profinet / EtherNet-IP deterministic networks. The input architecture enables I/O density scaling by providing eight configurable channels in a compact FLEX 5000 form factor. Firmware flash compatibility follows the supported FLEX 5000 platform requirements for controller integration.
Frequently Asked Questions
Q: Does the 5094-IY8 include the field wiring terminal base?
A: No. The module is supplied without a terminal base. A compatible separate terminal base is required for field-side wiring connection.
Q: Can the input channels operate with different signal types?
A: The module supports voltage, current, RTD, and thermocouple measurement types. Channel configuration depends on the controller software and module settings.
Q: What conversion technology is used for analog measurement?
A: The module uses Sigma-Delta conversion with two multiplexed 24-bit ADC analog input circuits.
Field Installation Guidelines
Install the module on the specified FLEX 5000 terminal base before connecting field wiring. Verify that the terminal base configuration matches the application wiring requirements.
Use shielded instrumentation cable for low-level analog signals, including RTD and thermocouple circuits. Connect cable shields according to the control cabinet grounding design and avoid parallel routing with high-current power conductors.
Maintain separation between analog input wiring and switching circuits, motor cables, or high-frequency noise sources. Confirm sensor polarity, channel configuration, and signal range settings before commissioning.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.