Allen Bradley 5094-OB32 FLEX 5000 Digital Output Module
$123.00
$320.00
Description
Allen Bradley 5094-OB32 FLEX 5000 Digital Output Module
Configured for 24 VDC digital signal switching in FLEX 5000 control systems, the Allen Bradley 5094-OB32 (5094-OB32 Digital Output Module) provides direct physical/electrical execution for discrete actuator control across EtherNet/IP based industrial platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 5094-OB32 |
| Brand | Allen Bradley |
| Weight | 0.55 lbs |
| Product Type | Digital Output Module |
| Product Line | FLEX 5000 |
| Channel Count | 32 channels |
| Operating Voltage | 18 to 32 VDC ON-state voltage range |
| Maximum ON-State Voltage Drop | 0.25 VDC |
| ON-State Current Per Channel | 1 mA minimum |
| Output Current Rating Per Channel | 0.5 A maximum |
| Output Current Rating Per Module | 10 A maximum |
| Maximum Surge Current | 1.4 A for 50 seconds per point |
| Maximum OFF-State Voltage Drop | 0.5 VDC with minimum 1 mA load |
| Maximum OFF-State Leakage Current | 0.5 mA per point |
| Overvoltage Protection | 36 V |
| Enclosure Type | Open-style enclosure |
| Mounting Method | DIN rail mount |
EtherNet/IP Deterministic Control and FLEX 5000 I/O Architecture
The 5094-OB32 is designed for FLEX 5000 distributed I/O applications requiring 32-point discrete output control. The module integrates into Allen Bradley controller architectures through FLEX 5000 I/O communication structures, supporting deterministic EtherNet/IP network operation.
The module provides output switching through 24 VDC field circuits, with per-channel current limitation characteristics defined by the hardware design. The output stage includes overvoltage protection and electrical isolation considerations required for industrial field wiring environments.
FLEX 5000 systems support scalable I/O density configurations, allowing multiple digital modules to be arranged within distributed control panels. Firmware compatibility must be verified between the module revision, controller platform, and engineering configuration software before commissioning.
Frequently Asked Questions
Q: Can the 5094-OB32 be installed using standard DIN rail mounting methods?
A: Yes. The module specification identifies DIN rail mounting as the installation method. Panel clearance and grounding requirements must follow the applicable FLEX 5000 installation documentation.
Q: What is the maximum output current capability of the module?
A: The module supports a maximum output current rating of 0.5 A per channel and 10 A per module according to the listed specifications.
Q: Does the module support hot-swapping during system operation?
A: Hot-swap capability is not specified in the available data. Field replacement procedures should follow the controller and FLEX 5000 system installation requirements.
Field Installation Guidelines
Install the 5094-OB32 on a properly secured DIN rail with sufficient spacing for wiring access and thermal conditions. Verify that the 24 VDC field power supply matches the module voltage requirements before connecting output circuits.
Use appropriate wire routing practices by separating low-level communication wiring from high-current actuator conductors. Connect cable shields according to the control cabinet grounding design to reduce electromagnetic interference.
Confirm terminal assignments, polarity, and load characteristics before energizing outputs. External protection devices should be evaluated for inductive loads such as solenoids, contactors, and motor control interfaces.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.