Allen-Bradley 6186M-17PT VersaView Industrial Monitor
$123.00
$320.00
Description
Allen-Bradley 6186M-17PT VersaView Industrial Monitor
Configured for local operator visualization of industrial computer video signals, the Allen-Bradley 6186M-17PT (6186M-17PT Industrial Monitor) provides a 17 in active-matrix TFT display with resistive touchscreen input. The unit accepts DVI and VGA video signals and supports 100-240 VAC or 9-36 VDC power input. The display uses an aluminum bezel and an antiglare resistive touchscreen option.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6186M-17PT |
| Brand | Allen-Bradley |
| Series | VersaView 6186M |
| Product Type | Industrial Monitor |
| Weight | 19.44 lbs |
| Dimensions | 45.2 cm x 6.1 cm x 35.6 cm (L x W x H) |
| Power Consumption | 55 W maximum |
| Display Size | 17 in |
| Display Type | Color active-matrix TFT LCD |
| Native Resolution | 1280 x 1024 |
| Display Colors | 16.7M colors |
| Luminance | 450 cd/m2 |
| Contrast Ratio | 1000:1 typical |
| Response Time | 8 ms maximum |
| Touchscreen | Resistive, antiglare |
| Video Inputs | DVI and VGA |
| AC Input | 100-240 VAC autoranging, 47-63 Hz |
| DC Input | 9-36 VDC, 24 VDC nominal |
| Bezel | Aluminum |
| Backlight Lifetime | 50,000 hours to half-life at 25 deg C |
| Mounting Options | Panel, bench, tabletop, rack, or DIN rail |
| Touchscreen Interfaces | RS-232 and USB, model dependent |
Industrial Control and Video Interface Characteristics
The 6186M-17PT provides direct display connectivity through DVI and VGA video inputs for industrial computing hardware. The resistive touchscreen uses RS-232 and USB interfaces where supported by the selected configuration. Therefore, touchscreen operation depends on the host computer interface and installed monitor configuration.
The power section supports both AC and DC input ranges, allowing connection to either 100-240 VAC supplies or 9-36 VDC sources. The AC input is autoranging across 47-63 Hz, while the DC specification identifies 24 VDC as the nominal operating point.
The 1280 x 1024 native resolution, 450 cd/m2 luminance, 1000:1 typical contrast ratio, and 8 ms maximum response time define the stated display characteristics. The active-matrix TFT LCD provides 16.7M display colors for graphical operator interfaces.
Frequently Asked Questions
Q: What video interfaces are available on the 6186M-17PT?
A: The monitor provides DVI and VGA video inputs for connection to compatible industrial computers and display sources.
Q: What power sources can the 6186M-17PT accept?
A: The unit accepts 100-240 VAC autoranging input at 47-63 Hz or 9-36 VDC input, with 24 VDC nominal.
Q: Does the 6186M-17PT include a touchscreen interface?
A: The specified configuration uses a resistive antiglare touchscreen with RS-232 and USB interfaces, subject to model configuration.
Field Installation Guidelines
Install the monitor on a mechanically rigid surface using the mounting arrangement selected for the installation. Verify that the enclosure, panel cutout, and mounting hardware accommodate the stated dimensions before installation.
Confirm the available supply voltage before energizing the monitor. Keep AC and DC supply wiring separated from low-level signal and communication wiring where practical.
Route DVI, VGA, RS-232, and USB cables away from high-current conductors, motor leads, contactors, and switching devices. Avoid excessive cable bending or mechanical stress at the connectors.
For installations using shielded signal cables, terminate cable shields according to the plant grounding architecture and avoid creating unintended ground loops. Maintain appropriate separation between power wiring and video or touchscreen signal wiring.
Verify the selected touchscreen interface before connecting the host system. Do not connect or disconnect signal cables while energized unless the system documentation specifically permits the operation.
Confirm adequate airflow around the monitor and avoid installation locations that exceed the manufacturer's specified environmental limits. The supplied data does not specify an operating temperature range, so the applicable Allen-Bradley installation documentation should be checked before final enclosure selection.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.