Allen-Bradley 871F-N65BP80-D4 Inductive Proximity Sensor
$123.00
$320.00
Description
Allen-Bradley 871F-N65BP80-D4 Inductive Proximity Sensor
Configured for non-contact metallic object detection in industrial automation, the Allen-Bradley 871F-N65BP80-D4 (871F inductive proximity sensor) provides direct DC sensing and PNP output switching.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 871F-N65BP80-D4 |
| Brand | Allen-Bradley |
| Sensor Type | Inductive proximity sensor |
| Form Factor | Flat pack style |
| Dimensions | 83 x 83 mm housing |
| Sensing Distance | 65 mm |
| Shielding Type | Unshielded, quasi-flat mounting |
| Operating Voltage | 10-30 VDC |
| Output Type | PNP sourcing, changeover, 1 NO + 1 NC |
| Maximum Load Current | 200 mA |
| Operating Frequency | 100 Hz |
| Connection | 4-pin DC Micro Quick-Disconnect, M12 |
| Housing Material | Plastic |
Allen-Bradley DC Sensor Interface Characteristics
The 871F-N65BP80-D4 uses a four-wire DC interface with complementary PNP sourcing outputs for switching control inputs.
The 1 NO and 1 NC output arrangement provides complementary switching states from the same sensing operation.
Its 10-30 VDC operating range supports direct connection to compatible DC control circuits within the specified electrical limits.
The 200 mA maximum load current defines the stated output switching capability for connected control loads.
The 100 Hz operating frequency specifies the maximum stated switching rate for object detection applications.
The unshielded construction requires appropriate mounting clearance from surrounding metallic structures to prevent unintended sensing effects.
Frequently Asked Questions
Q: What output configuration does the 871F-N65BP80-D4 provide?
A: The sensor provides PNP sourcing outputs configured as complementary 1 NO and 1 NC contacts.
Q: What connection interface is specified for this sensor?
A: The sensor uses a 4-pin DC Micro Quick-Disconnect connection identified as an M12 interface.
Q: Can the sensor switch a 200 mA load?
A: The supplied specification lists 200 mA as the maximum load current for the sensor output.
Field Installation Guidelines
Mount the sensor with sufficient clearance from unintended metallic targets because the supplied unit uses unshielded construction.
Maintain the specified 65 mm sensing distance when positioning the target relative to the sensing face.
Use compatible four-wire DC wiring and verify supply polarity before energizing the sensor.
Connect the PNP sourcing outputs only to control inputs compatible with sourcing transistor outputs.
Keep sensor wiring separated from high-current motor conductors, contactor wiring, and switching power circuits where practical.
Use appropriate cable shielding practices when electromagnetic interference affects signal integrity; terminate shielding according to the plant grounding scheme.
Verify the Micro Quick-Disconnect connector is fully seated and mechanically secured before commissioning.
Confirm the connected load remains within the specified 200 mA maximum output current.
Do not use the sensor beyond the supplied 10-30 VDC operating range or 100 Hz operating frequency.
Inspect the sensing face and mounting surface for metallic debris before functional testing.
After installation, verify both NO and NC output states through the complete target-present and target-absent sequence.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.