Allen-Bradley MPL-A230P-VJ72AA Kinetix MP-Series Low-Inertia Servo Motor
$123.00
$320.00
Description
Allen-Bradley MPL-A230P-VJ72AA Kinetix MP-Series Low-Inertia Servo Motor
Configured for high-speed positioning and dynamic motion control in Kinetix MP-Series systems, the Allen-Bradley MPL-A230P-VJ72AA (MPL-A230P-VJ72AA low-inertia brushless AC servo motor) provides direct mechanical output with absolute encoder feedback. The motor uses a 200 V AC class design, 5,000 RPM rated speed, keyed shaft, and multi-turn high-resolution Hiperface encoder.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MPL-A230P-VJ72AA |
| Brand | Allen-Bradley |
| Product Family | Kinetix MP-Series |
| Motor Type | Low-Inertia Brushless AC Servo Motor |
| Voltage Class | 200 V AC class |
| Frame Size | 200 frame size |
| Bolt Circle | Approx. 75 mm / 3 in. |
| Magnet Stack Length | 30; 76.2 mm / 3.0 in. |
| Rated Speed | 5,000 RPM |
| Feedback | Multi-turn high-resolution absolute encoder |
| Encoder Interface | Stegmann Hiperface |
| Shaft Type | Keyed shaft |
| Enclosure / Seal | Shaft seal included; IP66 when used with shaft seal and proper cable connections |
| Connectors | SpeedTec DIN connector, right-angle, 180 deg rotatable |
| Holding Brake | No brake; 24 V DC brake not included |
| Mounting | IEC metric mounting flange |
| Operating Temp | 0 deg C to 40 deg C |
| Housing | Aluminum |
Kinetix Servo Motor Feedback and Mechanical Characteristics
The MPL-A230P-VJ72AA uses high-energy rare-earth magnets within a low-inertia rotor configuration. This construction supports rapid acceleration and deceleration during commanded positioning sequences.
The multi-turn absolute encoder provides motor position feedback through the Stegmann Hiperface interface. Encoder feedback must remain correctly connected to the associated Kinetix drive for closed-loop position and velocity control.
The keyed shaft provides a positive mechanical coupling interface for compatible machine components. The integrated shaft seal supports the stated IP66 enclosure condition when the specified sealing and cable connection requirements are maintained.
The SpeedTec DIN connector uses a right-angle arrangement with 180 deg rotational adjustment. Cable routing should maintain connector clearance and avoid mechanical loading at the motor interface.
Frequently Asked Questions
Q: Does the MPL-A230P-VJ72AA include a holding brake?
A: No. The supplied data specifies no holding brake, and a 24 V DC brake is not included.
Q: What feedback device is installed on this servo motor?
A: The motor uses a multi-turn high-resolution absolute encoder with Stegmann Hiperface feedback.
Q: What operating temperature range is specified?
A: The supplied specification states 0 deg C to 40 deg C.
Field Installation Guidelines
Mount the motor using the specified IEC metric mounting flange and verify mechanical alignment before coupling the shaft.
Use compatible keyed couplings and maintain correct shaft alignment to prevent radial or axial loading beyond the machine design requirements.
Connect the SpeedTec DIN connector securely and route motor and feedback cables separately from high-current switching conductors where practical.
Maintain cable shielding and grounding according to the Kinetix drive installation documentation and the applicable machine grounding scheme.
Do not rely on the shaft seal alone to establish the stated IP66 condition. Verify connector engagement, cable sealing, and enclosure interfaces before commissioning.
Confirm encoder feedback wiring before enabling the servo axis. Incorrect feedback connections can produce position-control faults or unintended motor response.
Verify the motor operating environment remains within 0 deg C to 40 deg C and provide adequate clearance for heat dissipation around the aluminum housing.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.