Allen-Bradley MPL-B4560F-MJ74AA Low-Inertia Servo Motor
$123.00
$320.00
Description
Allen-Bradley MPL-B4560F-MJ74AA Low-Inertia Servo Motor
Configured for servo motion control in Kinetix platforms, the Allen-Bradley MPL-B4560F-MJ74AA (MPL-B4560F low-inertia servo motor) provides 400 V operation, 3000 RPM base speed, and absolute multi-turn encoder feedback.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MPL-B4560F-MJ74AA |
| Brand | Allen-Bradley / Rockwell Automation |
| Weight | 30 lb |
| Dimensions | 130 mm frame size; 152.4 mm magnet stack length |
| Motor Type | Low-Inertia Servo Motor |
| Voltage Class | 400 V |
| Base Speed | 3000 RPM |
| Feedback | 1024 Sin/Cos, absolute multi-turn encoder, Hiperface encoder |
| Enclosure | IP65/IP67 |
| Connector | Circular SpeedTec DIN connector; right-angle; 180 deg rotatable |
| Brake | 24 VDC holding brake |
| Shaft | Shaft key; no shaft seal |
| Product Line | MPL Servo Motors |
| Platform | Kinetix |
Industrial Motion and Feedback Characteristics
The MPL-B4560F-MJ74AA uses a low-inertia rotor configuration for servo applications requiring controlled acceleration and deceleration.
The 400 V voltage class corresponds to the specified motor electrical configuration within the MPL servo motor family.
Feedback uses a 1024 Sin/Cos signal arrangement with an absolute multi-turn Hiperface encoder.
The encoder provides rotational position information for servo control and motion synchronization within the supported drive architecture.
The 24 VDC holding brake provides mechanical shaft holding when the brake circuit is energized or released according to system configuration.
The IP65/IP67 enclosure specification provides the stated ingress protection level for the motor housing under applicable installation conditions.
The circular SpeedTec DIN connector supports right-angle cable routing and allows 180 deg rotational positioning.
Frequently Asked Questions
Q: What feedback device is specified for the MPL-B4560F-MJ74AA?
A: The motor uses a 1024 Sin/Cos absolute multi-turn Hiperface encoder for position feedback.
Q: What mechanical brake configuration does this motor use?
A: The motor includes a 24 VDC holding brake for mechanical shaft holding under the configured brake circuit.
Q: Does the motor have a shaft seal?
A: The supplied specifications identify a shaft key and explicitly state that the motor has no shaft seal.
Field Installation Guidelines
Install the motor using mounting hardware compatible with the specified 130 mm frame geometry and shaft configuration.
Verify the motor voltage class against the connected servo drive before energizing the power circuit.
Route motor power, feedback, and brake wiring separately where practical to reduce coupling of switching noise into feedback signals.
Use the specified circular SpeedTec DIN connector and maintain connector integrity during installation and commissioning.
Bond the motor frame to the protective earth system using the applicable plant grounding practice.
Avoid routing encoder wiring parallel to high-current motor conductors over long distances without appropriate separation.
Confirm encoder feedback wiring, brake wiring, and motor phases before applying drive power.
Do not infer operating temperature, continuous current, rated torque, or power consumption from the supplied specifications.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.