Allen Bradley VPL-B1003F-CJ12AA Low-Inertia Servo Motor
$123.00
$320.00
Description
The Allen Bradley VPL-B1003F-CJ12AA, also cataloged as the VPL-B1003F-CJ12AA Low-Inertia Servo Motor, provides direct rotary motion execution for Kinetix 5500 and Kinetix 5700 servo drive platforms using permanent magnet motor technology and Hiperface DSL feedback.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VPL-B1003F-CJ12AA |
| Brand | Allen Bradley |
| Product Type | Low-Inertia Servo Motors |
| Series | VPL Servo Motors |
| Motor Type | Brushless AC permanent magnet servo motor |
| Weight | 5.42 kg |
| Dimensions | Frame size: 100 mm |
| Power Consumption | Rated power: 1.65 kW (2.21 HP) |
| Voltage Rating | 460 VAC |
| Voltage Class | 400 V |
| Rated Speed | 4500 rpm |
| Maximum Operating Speed | 4750 rpm |
| Continuous Stall Torque | 4.18 Nm (37.0 lb-in.) |
| Peak Stall Torque | 11.15 Nm (99.0 lb-in.) |
| Feedback Type | 18-bit absolute single-turn digital encoder, Hiperface DSL protocol |
| Magnet Stack | 3 magnet stacks |
| Brake | No brake |
| Shaft Configuration | Shaft key, no shaft seal |
| Connector | Single SpeedTec DIN connector, right angle, 325 deg rotatable |
| Mounting Flange | IEC metric free mounting holes, Type FF |
| Compatible Servo Drives | Kinetix 5500, Kinetix 5700 |
EtherNet/IP Motion Control and Servo Feedback Integration
The VPL-B1003F-CJ12AA operates within Allen Bradley motion architectures using Kinetix servo drive systems and deterministic EtherNet/IP communication networks. The motor integrates an 18-bit absolute single-turn digital encoder using Hiperface DSL protocol for position feedback transmission.
The VPL motor platform supports firmware flash compatibility between matched Kinetix drive configurations, allowing controller systems to maintain validated motion parameter sets during commissioning procedures. I/O density scaling and motion axis coordination depend on the selected controller and network architecture.
The permanent magnet motor construction provides defined torque characteristics for applications requiring controlled acceleration, deceleration, and positioning response. The shaft key interface enables mechanical coupling with compatible machine assemblies.
Frequently Asked Questions
Q: Does the VPL-B1003F-CJ12AA include an integrated motor brake?
A: No. The supplied specifications indicate that this servo motor configuration is provided without a brake option.
Q: What feedback interface is installed on this servo motor?
A: The motor uses an 18-bit absolute single-turn digital encoder with Hiperface DSL protocol feedback.
Q: Which servo drive platforms support this motor model?
A: The VPL-B1003F-CJ12AA is specified for compatibility with Allen Bradley Kinetix 5500 and Kinetix 5700 servo drives.
Field Installation Guidelines
Install the motor according to the mechanical alignment requirements of the connected machine structure and IEC metric flange dimensions. Verify shaft coupling alignment before applying operational torque.
Use the specified SpeedTec DIN connector and maintain proper cable routing separation from high-voltage switching conductors to reduce electrical interference. Connect encoder and power wiring according to the servo drive installation documentation.
Ground the motor housing and cable shield according to industrial grounding practices. Avoid routing feedback cables parallel to sources of electromagnetic noise, including contactors, variable frequency drives, and high-current motor conductors.
Confirm encoder communication, motor identification parameters, and direction feedback before enabling closed-loop motion operation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.