Emerson SE4302T01 KL3002X1-BA1 DO 24 VDC High Side CHARM

Overview

The Emerson SE4302T01 KL3002X1-BA1 is a 24 VDC high-side digital output CHARM module. It controls solenoids, valves, and relays in industrial automation systems. Its compact, pluggable design allows flexible installation and easy maintenance. The module works in hazardous and non-hazardous zones with proper precautions. Keying ensures correct CHARM-to-terminal block connection. No calibration is required, simplifying operation.

Technical Specifications

• Model: SE4302T01

• CHARM Type: KL3002X1-BA1

• Function: Digital Output – High-Side Switching

• Voltage Rating: 24 VDC

• Output Type: High-side switch (switches positive side of load)

• Typical Load Types: Solenoids, relays, valves, and other inductive loads

• Installation Zone: Zone 2 hazardous areas (with precautions)

• System Compatibility: DeltaV™ CHARM I/O subsystem

• Device Type: 24 V DC solenoid coils

• On-State Output Rating: 100 mA continuous @ 24 V DC

• Off-State Leakage Current: 1 mA maximum

• Line Fault Detection:

• Short circuit: <50 Ω load

• Good status: 240 Ω to 10 kΩ load

• Open circuit: >20 kΩ load

• Configurable Output Behavior: Momentary output, continuous pulse output, line fault testing

• Line Fault Test Timing: 200 µsec

• Field Circuit Protection: 200 mA current limiting, field wiring disconnect

• CHARM Power Requirement:

• 116 mA max @ 24 V DC (standard terminal block)

• 24 mA max @ 24 V DC (relay output terminal block)

• CHARM Heat Dissipation: Pulse train 0.1 Hz to 10 kHz, 50 µsec minimum pulse width