Epro CON031+PR6423/00R-101 Eddy Current System Kit
$178.00
$390.00
Description
Product Description
The CON031 + PR6423/00R-101 is an integrated eddy-current measurement solution combining a proximity probe with a dedicated signal conditioning module. The system is engineered for continuous monitoring of shaft displacement and vibration in high-speed rotating machinery, delivering stable, contact-free measurement data for protection and diagnostics.
The probe performs the primary sensing function, while the CON031 unit processes the raw eddy-current signal into standardized industrial outputs suitable for control and monitoring systems.
Technical Specifications
Probe Unit – PR6423/00R-101
| Parameter | Specification |
|---|---|
| Sensor Type | Eddy-current proximity displacement probe |
| Probe Diameter | 8 mm |
| Measurement Range | ~0–2 mm typical (system calibrated, up to 15 mm depending configuration) |
| Target Material | Conductive ferromagnetic steels (optimized for shaft surfaces) |
| Frequency Response | Up to 1 MHz (probe-level dynamic capability) |
| Housing Material | Stainless steel (corrosion-resistant) |
| Tip Material | PEEK (Polyether Ether Ketone) |
| Operating Temperature | -35 °C to +100 °C |
| Cable Temperature Rating | Up to +150 °C (dependent on cable type) |
| Cable Length | Standard 3 m (custom options available) |
| Protection Rating | IP66 (installed condition dependent) |
Signal Converter – CON031 Module
| Parameter | Specification |
|---|---|
| Function | Eddy-current signal conditioning and conversion |
| Input Signal | Raw probe signal from PR6423 series |
| Output Types | 4–20 mA / 0–10 V analog output |
| Supply Voltage | 24 V DC (operating range 10–30 V DC) |
| Operating Temperature | -20 °C to +70 °C |
| Mounting Type | DIN rail or panel installation |
| Certifications | CE, ATEX, IECEx, CSA (variant dependent for hazardous zones) |
| Protection Concept | Intrinsically safe configurations available |
System Engineering Characteristics
-
Dual-component architecture ensures separation of sensing and signal conditioning
-
Non-contact eddy-current principle eliminates mechanical wear
-
Stable measurement performance under high-speed shaft rotation
-
Compatible with industrial protection and condition monitoring platforms
-
Suitable for long-term continuous operation in harsh mechanical environments
Application Scope
-
Steam and gas turbine shaft vibration monitoring
-
Compressor axial displacement and instability detection
-
Generator rotor condition assessment
-
Gearbox misalignment and wear detection
-
Predictive maintenance systems in heavy rotating equipment
Installation Considerations
-
Proper air gap control is critical (typically around 0.5 mm depending on target geometry)
-
Calibration must match probe-to-surface material characteristics
-
Converter selection determines system output format and safety classification
-
Shielded cabling recommended in high EMI environments
FAQ
Q1: Can the probe operate without the CON031 module?
No. The probe generates raw eddy-current signals and requires CON031 for signal conversion.
Q2: Is the system suitable for hazardous environments?
Yes, when used with certified CON031 variants, the system supports ATEX/IECEx applications.
Q3: What materials are recommended for measurement targets?
Ferromagnetic steels such as shaft-grade alloys provide the most stable response.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.