GE DS3800HVDB1K1G Mark IV Video Driver Board

The GE DS3800HVDB1K1G is a Video Driver Board in the Mark IV DS3800 series. The board has a modular connector, retention levers, a 20-pin connector, multiple programmable memory modules, and 15 jumpers. Its physical layout supports installation within the drive assembly, while the memory devices hold code associated with drive processing.

Board Layout and Connections

The board uses a modular connector at one end and retention levers at the other. A 20-pin connector is positioned between the retention levers. These features help identify the board and its connection points during inspection or replacement.

The board also contains 15 jumpers. Their specific functions and required positions are not documented in the supplied information, so jumper settings should be verified against the installed system configuration rather than inferred.

Memory Modules and Firmware

The onboard programmable memory modules store firmware or other code associated with drive processing. The supplied description states that the memory can be electronically updated without removing the modules from their sockets.

When replacing a faulty board, the existing memory modules may need to be transferred to the replacement board if the required configuration depends on them. Confirm the memory contents, socket arrangement, and board configuration before removing or installing components.

Technical Specifications

Replacement Considerations

Before installing a replacement DS3800HVDB1K1G, verify the complete part number and board revision against the installed hardware. The connector arrangement alone does not establish compatibility with other DS3800 variants.

If the replacement board is supplied without memory modules, determine whether the original modules must be transferred. Preserve the original module positions and jumper settings where applicable, and verify the required configuration before returning the drive to service.

Frequently Asked Questions

Q: What is the function of the GE DS3800HVDB1K1G?

A: It is identified as a Video Driver Board in the Mark IV DS3800 series. Its onboard connectors, programmable memory modules, and jumpers are the documented hardware features relevant to identification and maintenance.

Q: Do the memory modules need to be removed to update their contents?

A: The supplied description states that electronic updates can be performed without removing the modules from their sockets. The supported programming procedure and required equipment are not specified.

Q: What should be checked when replacing this board?

A: Verify the full model number, connector arrangement, memory-module requirements, and jumper configuration. Do not assume that another DS3800 board revision is interchangeable without supporting compatibility information.