GE IC695PNS001 PROFINET Scanner Module

Overview

The IC695PNS001 is a PROFINET Scanner Module for the PACSystems RX3i platform. It provides high-speed, deterministic communication between a PROFINET I/O Controller and remote RX3i or Series 90-30 I/O racks. Therefore, it suits distributed control systems requiring robust Ethernet communication, media redundancy, and flexible topology support. The module also simplifies configuration using USB and SD card support, while eight LEDs display operational status and diagnostics clearly.

Technical Specifications

• Module Type: PROFINET Scanner

• Supported Platforms: PACSystems RX3i

• Communication Protocol: PROFINET I/O

• Ethernet Ports: 4 switched ports — 2 × RJ-45 (10/100/1000 Mbps), 2 × SFP cages for fiber

• USB Port: 1 Micro-B USB 2.0 for firmware updates

• SD Card Support: Yes, for device name transfer and configuration backup

• Media Redundancy: Supports MRP (Media Redundancy Protocol)

• Network Topologies: Daisy-chain, star, ring

• I/O Data Exchange Rate: Configurable production rate

• Status Indicators: 8 LEDs showing 22 diagnostic patterns

• Power Requirements: 3.3 VDC @ 1.2 A, 5 VDC @ 1.1 A

• IP/MAC Addressing: 1 CIDR IP address, 5 MAC addresses

• Slot Requirement: Single slot on RX3i universal backplane

• Operating Temperature: 0 to 60°C

• Storage Temperature: -40 to 85°C