Honeywell 51304163-300 UCN Communication Module
$209.00
$450.00
Description
The Honeywell 51304163-300, also cataloged as the 51304163-300 UCN Communication Module, is described as a communication interface for Honeywell Process Manager (PM) and TDC 3000 systems. It supports Universal Control Network (UCN) communication for exchanging process data between compatible control system components. The supplied specifications list a 24 VDC operating voltage and a maximum data rate of 1 Mbps.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51304163-300 |
| Brand | Honeywell |
| Product Type | UCN Communication Module / Modem Board |
| Compatible Systems | Honeywell Process Manager (PM), TDC 3000 (as listed) |
| Communication Protocols | UCN, Modbus RTU (as listed; verification required) |
| Serial Interfaces | RS-232, RS-485 (as listed; verification required) |
| Ethernet | Optional; configuration requires verification |
| Maximum Data Rate | 1 Mbps (as listed; verification required) |
| Operating Voltage | 24 VDC (as listed; verify rack power requirements) |
| Country of Origin | USA (as supplied; verify against product documentation) |
| Weight | 1.00 lb |
| Dimensions | 120 x 80 x 50 mm |
| Operating Temp | -40 to +85 deg C (as supplied; verify manufacturer rating) |
UCN Communication and Interface Considerations
The 51304163-300 is described as a board-level communication module for Honeywell PM and TDC 3000 control environments. UCN connectivity provides the network communication path between compatible system components. Actual protocol support, serial interface availability, and data rate must be confirmed against the module revision and the applicable Honeywell hardware documentation.
The supplied listing also mentions Modbus RTU and optional Ethernet. These interfaces should not be assumed to be present on every 51304163-300 configuration without confirmation from the manufacturer documentation or the installed board.
Frequently Asked Questions
Q: Can the 51304163-300 operate outside a Honeywell PM rack?
A: The supplied information identifies it as a rack-oriented module. Standalone operation should not be assumed. Confirm mounting, connector pinout, power input, and communication requirements before installing it outside the specified rack.
Q: What power supply and current capacity are required?
A: The supplied data lists 24 VDC but does not specify current consumption or power dissipation. Verify the module's electrical requirements and rack power budget before installation.
Q: Does the module support Ethernet and Modbus RTU simultaneously?
A: The supplied listing mentions both interfaces but does not establish their availability on the same hardware revision or configuration. Confirm the supported interfaces and protocol combinations using the applicable hardware manual.
Field Installation Guidelines
- Verify the complete part number, board revision, and compatibility with the target Honeywell PM or TDC 3000 rack before installation.
- Isolate the rack power according to the system maintenance procedure before inserting or removing the module. Do not assume hot-swap support without explicit documentation.
- Inspect the board connector, rack slot, and mating contacts for contamination, damage, or misalignment.
- Confirm the rack power supply specifications and module voltage requirements. Do not energize the module until the required supply connections have been verified.
- Route communication cables separately from high-voltage and high-current conductors where practical. Follow the applicable cable shielding, grounding, and termination requirements.
- Confirm UCN network addressing, cabling, and communication configuration against the existing control system documentation before returning the system to service.
- After installation, verify module status indications and communication with the intended system components. Record any diagnostic faults before placing the module into operation.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.